dm8165 psp uboot problem

Yaming Deng

I am trying run dm8165 now. We use u-boot bin file run in dm8165. And the uart cannot output anything. But the uboot bin runs well under dm8168.
We have checked the DDR under CCS, it can load file to DDR3.

What we should porting if we want run dm8165 under the latest RDK?

over 13 years ago

0 Vaibhav Bedia over 13 years ago

TI__Expert 5290 points

Hi,

For ruling out issue with DDR setup, I would suggest you build a u-boot binary which runs out of internal memoryand then run a mtest from the U-Boot prompt. You can build the image by using the target name "ti8168_evm_min_ocmc" during the build.

Regards,

Vaibhav

0 Yuri Gusko over 13 years ago in reply to Vaibhav Bedia

Prodigy 180 points

Hi,

I'm trying dm8168.

When I compile u-boot by using ti8168_evm_config - everything OK, but using ti8168_evm_min_ocmc get UART stuck.

Is it way to resolve this problem?

Thanks a lot

Processors

Processors forum

dm8165 psp uboot problem