How to set and verify SmartReflex functionality of DM8148?

Hi Spark,

It is being characterized & not completed yet.

Regards,

Where are we at with this?  What can you share at this time so many of us on the forum can get the most accurate information?

Any updates on SmartReflex functionality in DM8148?

Paddu1,

Unfortunately, We do not support SmartReflex yet.  Once we do, we will put in our SDK release.

BR,

Viet

Hello Viet,

Thank you so much for the reply.
We understood this is not yet decided.

Just in case our customer is very curious to know the concept of SmartReflex.
If possible could please try to answer the question below.

http://e2e.ti.com/support/dsp/omap_applications_processors/f/447/t/191242.aspx

Regards,
paddu

Paddu,

The link is for OMAP35x and I don't support OMAP35x.

BR,

Viet

Hi Viet,

I sorry for posting the question in OMAP35x forum.

Below is the question,
We are trying to understand the features of SmartReflex.
With the SmartReflex function, the voltage will be reduced and the clocks are
gated according to the requirement for the processor performance.

We would like to know what is the start up time required to reenable the
gated clock or the start-up time of that clock
i.e from a gated clock to normal or active clock.

Please let us know if there is any reference or documents regarding this topic.

Regards.
Paddu

Hi Paddu,

SmartReflex will reduce the active power consumption by reducing the voltage according to temperature, voltage, aging and process. And it will not gate any clocks.

Regards

AnilKumar

Please mark this Forum post as answered via the Verify Answer button below if it helps answer your question.  Thanks!

Is SmartReflex supported on 8148 yet? If it is, is there an information on how to enable it?

Many Thanks,

-Ben

Hi Ben,

Sorry but the SmartReflex is not going to support on DM8148.

BR,

Viet