• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 79 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VE-Q1: IPM6- Boot log issue

Arumugam Elumalai
Intellectual 365 points
Part Number: TDA4VE-Q1

Tool/software:

Hi,

Tested the IPM6 using WKUP_UART boot mode for the custom design. The boot log is printed as below.

whats the reason to log as failed to copy EEPROM data and in the next line printed as EEPROM data copy done.

Would you pls send your feedback?

Thanks-Arum

  • +1
    TI__Genius 13170 points

    Hi Arum,

    Arumugam Elumalai said:

    whats the reason to log as failed to copy EEPROM data and in the next line printed as EEPROM data copy done.

    The log Failed to copy EEPROM Data is printed if Board_initBoardIdData() returns an error ,due to EEPROM read failure or invalid magic number, but the next line EEPROM Data Copy Done is printed unconditionally, which is misleading with out any else part, I will create an internal bug this, that should be fix in future release.

    Regards,

    Karthik