• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 143 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM625: NEED info on how to access PMIC register from MCU_SDK

CHETHAN MN
Prodigy 80 points
Part Number: AM625
Other Parts Discussed in Thread: AM62P,

Tool/software:

Hello ,

NEED info on how to access PMIC register from MCU_SDK,

Regards

Chethan

  • 0
    TI__Mastermind 47836 points

    Hello Chethan,

    In MCU+SDK we don't have any support for PMIC drivers.

    If you want to access these registers, then you need to check the PMIC datasheet and, next, you need to implement the PMIC  I2C application and send the commands to read data from the registers.

    This way you can read them.

    In AM62P MCU+SDK, the PMIC driver is supported. So, it is helpful for you to implement similar method on the AM625 devices.

    C:\ti\mcu_plus_sdk_am62px_10_00_00_14\examples\drivers\pmic

    Regards,

    Anil.