Where is the QUE module?

David Aldrich

Other Parts Discussed in Thread: SYSBIOS

Hi I want to use the QUE module in a CCS 5 project. I thought that SYS/BIOS had superceeded DSP/BIOS. Therefore, I expected to find the QUE module in SYS/BIOS but it does not seem to be there. Am I misunderstanding? David

over 14 years ago

0 Alan DeMars over 14 years ago

TI__Mastermind 30830 points

David,

Yes, SYS/BIOS has a Queue module: "ti.sysbios.knl.Queue".

Unfortunately, we haven't added it to the product view so it is not yet selectable graphically.

Add the following to your config script to use the Queue module:

var Queue = xdc.useModule( 'ti.sysbios.knl.Queue');

The CDOC for the Queue module is available here:

http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/bios/sysbios/6_33_00_19/exports/bios_6_33_00_19/docs/cdoc/index.html

The Queue module will be visible in the product view starting with the 6.33.01 release due out later this month.

Alan

0 David Aldrich over 14 years ago in reply to Alan DeMars

Expert 1345 points

Hi Alan

Thanks for your reply. How do I create a queue?

David

0 David Aldrich over 14 years ago in reply to David Aldrich

Expert 1345 points

I will ask for a code example on a new thread.

Processors

Processors forum

Where is the QUE module?