SK-AM62-SIP: AM62SIP not booting on default am62xx image

Hello Suren,

Thank you for responding. I am currently using this SDK version. It came out 6 months ago. Do you know of any plans to update the SIP SDK and default images? We are planning to use this processor for over 2000 units and would like to know if and when it will be supported. This is because there currently is a bug in the WiFi driver for the m.2-cc3351 on the am62sip board, and perhaps a new image/sdk version would address this bug.

Hi Suren,

Just checking in. I was wondering if you or someone you know may know when the next update is coming for SIP. We are considering trying an updated board for now.

Kind regards

Hi David,

I am currently on a business travel and checking with the team if this is going to be supported in 11.1 SDK.I will have a response by next week when I will be back in office.

Apologies for the delay.

Best Regards,

Suren

hi david,

have you resolve your issue?
i face the same issue with my custom am6254 board.

i tried default (prebuild-image), build image with ti-u-boot from sdk and also tried to build image with buildroot but face same log and stuck 

i notice mt sdcard clock its going 25Mhz and stop after print the following logs

U-Boot SPL 2025.04 (Jun 05 2025 - 11:00:42 +0530)
SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)')
Changed A53 CPU frequency to 1250000000Hz (T grade) in DT
SPL initial stack usage: 13424 bytes

i configured my boot pin as [B0:B2]=>110, [B3:B9]=>1110001, [B10:B13]=>1011, [B14:B15]=>00
primary boot => UART
secondary boot =>SDCARD

Hi Umang,

This query was related to AM62SIP. 

Can you open a newer thread attaching the log and observation, for us to better support you. 

please share the thread so I can have it routed to the right expert. Closing this thread.

Best Regards,

Suren