TDA4VM-Q1: TDA4VM-Q1: Check H/W and S/W compatibility btw SR1.1 and SR2.0

Jay Sun

Part Number: TDA4VM-Q1
Other Parts Discussed in Thread: TDA4VM

Tool/software:

HI Expert

Please check if SR1.1 to SR2.0 would be H/W and S/W compatible without any changes?
If SR2.0 requires new changes, Please provide the appropriate documents for new design guide with new SR 2.0 version.

SDK Version:10.00

JAY

3 months ago

0 Jay Sun 3 months ago

Expert 1095 points

Hi Expert

Follow is before and after information

Before Part# : TDA4VM88TGBALFRQ1(GP device, SR1.1)
After Part# : TDA4VM88TGCALFRQ1(GP device, SR2.0)

0 Suman Anna 3 months ago in reply to Jay Sun

TI__Guru** 112655 points

Hi Jay,

The SR2.0 support for TDA4VM is added first in 10.0 SDK, so the stock 10.0 SDK already supports both SR1.1 and SR2.0 devices.

You are also using GP devices, and there should be no additional changes needed for GP device.

Please refer to the following FAQ, that provides some patches for some earlier SDK versions for HS devices.

[FAQ] TDA4VM-Q1: TDA4VM SR2.0 SBL and SPL boot flow

regards

Suman

Processors

Processors forum

TDA4VM-Q1: TDA4VM-Q1: Check H/W and S/W compatibility btw SR1.1 and SR2.0