• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 260 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-AM263: Alignment time for HALL - AM263 Universal Motor Control

Burak Yeniaydin
Prodigy 220 points

Part Number: LP-AM263

Tool/software:

Hello,

I work on Universal Motor Control Example in AM263 motor control SDK. In this code alignTimeDelay is set 2 seconds for HALL configuration (the others are set 0.1 second). Why?

I set this value to 0.1 seconds and it worked fine.


Best Regards,
Burak

  • 0
    TI__Genius 9260 points

    Burak,

    We check and confirm universal code using various motors and EVMs. This is where parameter differences can arise from those tests (longer delay might not be strictly necessary in all cases). Overall, users need to adjust this parameter if their system requires a delay before moving to the next step.

    Best Regards,

    Masoud