Tool/software:
Dear Support Team,
Wanted to check if there is a specific datasheet just for J784S4:TDA4VH-Q1?
Best Regards,
Adithya
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Dear Support Team,
Wanted to check if there is a specific datasheet just for J784S4:TDA4VH-Q1?
Best Regards,
Adithya
Hi Adithya,
The datasheet for j784s4 can be found here : https://www.ti.com/lit/gpn/tda4vh-q1
If you want more info the device hardware you can see the TRM : https://www.ti.com/lit/zip/spruj52
Regards,
Tanmay
Are the Pinmux register information available in the TRM? I am not able to find any register information for Pinmux. Is it the Pad Configuration registers found in the Control Module?
Hi Adithya,
The pinmux information is provided in the datasheet. For every ball, you can find its pinmux info like this:
The padconfig are the registers you need to modify for that specific pad.
Regards,
Tanmay
Hi tanmay,
Sorry for the inconvenience but i have one more follow up question. The table you have shared gives me details on the mutlipexed signals and muxmodes. But my main doubt is where i can find the pinmux register information( like register addresses, r/w access and types)?
Hi Adithya,
In the second column, you have the PADCONFIG reg address. This is where you need to modify to change the pinmux. This register definations you would be able to find in the spreadsheet which comes with the TRM.
But plesae note that all the OSes have MACROs defined to change this pinmux. Please go through the SDK documentaion for more details.
Regards,
Tanmay