Error while building non-BIOS project

Vinayaka Hegde

Intellectual 260 points

While building the Non-BIOS project in CCS5 I am getting the following error

"fatal error #16004: file "C:/Program Files/Texas

Instruments/ccsv5/tools/compiler/c5500/lib/rts55x.lib<divul.obj>" has a

Tag_Memory_Model attribute value of "2" that is different than one

previously seen ("1"); combining incompatible files"

Why I am getting the error? Any one has the idea? Any input required to know this problem?

over 13 years ago

0 Karl Wechsler over 13 years ago

TI__Mastermind 20805 points

Hi Vinayaka --

This question is probably better for the compiler forum, but I think I know what's going on.

The 55x compiler supports different runtime options for the data memory accesses: small, large and huge. I think you are trying to link object files that were compiled for different runtime models. All object files need to be compiled for same runtime model. You should look at your linker command file and/or your compiler options in the CCS build menus and make sure that all code is compiled for the same runtime model.

Regards,
-Karl-