How about does TMDXICE3359 work with F23335 ?

Jimmy Liu81957

Intellectual 310 points

Hi Sir,

We have F28335 for Motor controller . We want to add industrial communications like EtherCAT or POWERLINK .

What do we use TMDXICE3358 or TMDXIDK3359 to evaluate with F28335 ?

Regards,

Jimmy

over 13 years ago

0 Maneesh over 13 years ago

TI__Intellectual 1835 points

On F28335, what interface do you plan to connect a EtherCAT interface on? The ICE has a header where you can connect to another MPU/MCU for development/testing. For IDK also, it is possible. We are shortly going to have schematics for both boards online - that will help you decide for sure.

Thanks.

0 Jimmy Liu81957 over 13 years ago in reply to Maneesh

Intellectual 310 points

We plan used SPI as Host interface . If you have new information online,Please let me known .

Regards,

Jimmy

0 Maneesh over 13 years ago in reply to Jimmy Liu81957

TI__Intellectual 1835 points

Good. We connect a Piccolo device over SPI also in the IDK (TMDX3359IDK) development platform for motor control. The EtherCAT portion is done on AM335x and motor control and feedback on Piccolo C2000 device.

Thanks.

0 Jimmy Liu81957 over 13 years ago in reply to Maneesh

Intellectual 310 points

We think about when we want to build up muti-axis motor operating system .

The SPI work as host interface . Were the bandwith enough?

Regards,

Jimmy

0 Maneesh over 13 years ago in reply to Jimmy Liu81957

TI__Intellectual 1835 points

We prototypes single axis control system and bandwidth was enough for that.

Thanks.

Processors

Processors forum

How about does TMDXICE3359 work with F23335 ?