• State Resolved
  • Replies 4 replies
  • Subscribers 99 subscribers
  • Views 50 views
  • Users 0 members are here
Support feedback
Options
Options
Related

AM62L: Eth down and up can't work

Biao Li
Expert 6550 points
Part Number: AM62L

Tool/software:

Hi Daolin,

Customer report an issue about the Eth, when customer run below command, the eth can't recover any more. Pls help have a try on your side and help customer to fix this issue.

ifconfig eth0 down
ifconfig eth1 down
ifconfig eth0 up
ifconfig eth1 up

BR,

Biao 

  • 0
    TI__Expert 6550 points

    Hi Daolin,

    1. What SDK version  SDK11.0
    2. Is this a custom board or TI EVM Both TI EVM and custom board can be reproduced.
    3. Is there any log to show the “eth can’t recover” anymore?

    I am asking customer to provide.

    BR,

    Biao 

  • 0 in reply to Biao Li
    TI__Expert 6550 points

    Hi Daolin,

    customer feedback this issue is fixed in SDK11.1, can you help share some patch to customer to help fix it in SDK11.0.

    BR,

    Biao 

  • +1 in reply to Biao Li
    TI__Guru* 84155 points

    Biao

    May i ask why customer is asking for a patch. For all practical purposes every customer should be using AM62L PG1.1 with SDK11.1 as a baseline going forward. It will be the right time to ask them to migrate now, while this is still an 11.x release and is also being done for silicon that is the RTM silicon.


    Regards

    Mukul 

  • 0 in reply to Mukul Bhatnagar
    TI__Expert 6550 points

    Hi Mukul,

    It is make sense to me. do you mean all customers should upgrade to SDK11.1 + PG1.1? I think this is important info, I don't know before, I will let customer upgrade to SDK11.1.

    BR,

    Biao