Dear TI Team,
We are in need of designing an SBC with DRA60x or DRA61x for Automotive application.
Could you please help us getting the Datasheets, Application notes and other Design informations?
Thanks and regards,
Paul
Dear TI Team,
We are in need of designing an SBC with DRA60x or DRA61x for Automotive application.
Could you please help us getting the Datasheets, Application notes and other Design informations?
Thanks and regards,
Paul
Hello Paul,
Thank you for the query.
Let me check internally.
Please expect some delay in response.
Regards,
Sreenivasa
Hello Paul,
We are in need of designing an SBC with DRA60x or DRA61x for Automotive application.
The information for the part number you quoted is not authorized to be available publicly.
Are you able to confirm source of inputs on the device part number over private chat.
Are you working with any of the TI sales team on this requirements?
Regards,
Sreenivasa
Hello Sreenivasa,
Sorry for the delayed reply.
We were looking for an automotive Variant for AM335x and I got this part number from E2E forum itself.
Are you able to confirm source of inputs on the device part number over private chat.
Ans: We got the input from following link
Are you working with any of the TI sales team on this requirements?
Ans: No. Not yet.
Thanks and regards,
Paul
Hello Paul
Thank you. Please refer below
e2e.ti.com/.../am3352-automotive-qualificationThe automotive variant of AM335x is DRA60x/DRA61x Jacinto5 Entry device. This is Automotive Qualified Device (AEC-100). This device datasheet is under NDA, and you should contact your local TI representative to get it. The TRM and silicon errata are common with AM335x device.
Regards,
Sreenivasa
Hi Sreenivasa,
No TI representative was assigned for us. Please let us know the procedure for that.
Thanks and regards,
Paul
Hello Paul
You will have to reach out to the sales team depending on the location you are at, sign an NDA to obtain the documents.
Let me check and comeback on the method to reachout to TI sales.
Regards,
Sreenivasa