This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM62L: eMMC flash through DFU

Part Number: AM62L

Dear Team,

I have flashed with dfu tool uboot binaires and rootfs (rootfs.wic) are flashing properly and board boots till uboot properly but when uboot trying to read image binaries from emmc partition "can't set block device" error is observed.It seems like in emmc partition doesn't has proper filesystem.I am using below command to flash rootfs

sudo ./dfu-util  -a rootfs -D tisdk-tiny-image-rootfs.wic

Note: here i am using tiny-image binary for flashing  


Regards,
Sushmitha