Part Number: DRA829V
Hi,
I have custom board with TI DRA829V processor. We have UFS flash interface in our board. We want to check the UFS memory is detected or not in the u-boot. i have provided below commands.
=> ufs init
Device at ufs@4e84000 up at:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
=> scsi scan
scanning bus for devices...
Error in status:00000004
OCS error from controller = f
Error in status:00000004
OCS error from controller = f
Error in status:00000004
OCS error from controller = f
Error in status:00000004
OCS error from controller = f
Error in status:00000004
OCS error from controller = f
Error in status:00000004
OCS error from controller = f
Error in status:00000004
The above errors are coming , please let us know what could be the issue.
