TDA4VEN-Q1: ISP tunning tool

Hi Cesar,

cesar.xu said:

1.The model we are currently using is j722s, but the old DCC version is not supported

Which version of tuning tool do you have?

The screenshot above looks similar to the latest release.

VPAC3L is used in both AM62A and j722s.

cesar.xu said:

2.The application link provided by the FAE in this area was rejected.

Do you mean it expired (typically it is valid for 1 year) or your recent application is rejected?

If it is expired, you would need to re-apply.

 [FAQ] DCC Tuning Tool V3.2 for VPAC on TDA4x and AM6xA Devices 

Hi Gang Hua,

1. ver.3.2

The current version was released over two years ago and has not been updated since then. There is no option for tda4evn-j722s here

2.Reapplication is not possible.

3.Please provide the relevant isp tunning documentation applicable to the tda4evn model

Regards,

Cesar

Hi Cesar,

cesar.xu said:

1. ver.3.2

V3.2 is the latest version.

The AM62A and TDA4VEN/j722s share the same VPAC3L version of ISP.
We don't have a separate version of tuning tool or document for TDA4VEN.

cesar.xu said:

2.Reapplication is not possible.

Are you able to access this link in the FAQ page?

www.ti.com/.../ADAS-SW-IMAGING

Hi Gang Hua,

Then let's continue to use this version of the tool. Please provide the development manual.

Regards,

Cesar

Hi Cesar,

cesar.xu said:

Then let's continue to use this version of the tool. Please provide the development manual.

The main TDA4VEN document is its TRM with the VPAC chapter: https://www.ti.com/lit/zip/sprujb3

We don't have separate VPAC tuning document for TDA4VEN.
You may refer to the app notes below for AM62A and TDA4.
VPAC3L is mostly backward compatible with VPAC3.

https://www.ti.com/lit/pdf/sprad86
https://www.ti.com/lit/pdf/spracu7

Which type of sensor are you working on?