• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM625: AM62x EVM problem with running sbl keywriter

Karolina Kasperek
Prodigy 10 points

Part Number: AM625

Hey,

I am trying to run sbl keywriter on am62x evm. Unfortunately after few days I am still not able to do it, programmed firmware seems to not running. I've done everything that was written in am62x academy related to this topic step by step.

I successfully run sbl_sd and sbl_uart example with r5fss-nortos configuration. Tried to compare it to sbl keywriter configuration but I don't have more ideas and I feel stuck. I will be thankful for any help from your side.

 

  • 0
    TI__Guru* 89191 points

    Hello,

    It is likely caused by the MCU+ SDK version you are using. Please note the keywriter package is compatible with a certain SDK version only which is mentioned in the user guide. Please make sure you are using the expected SDK version with the keywriter package.