J722SXH01EVM: MCU+SDK with CCS

Alp

Hello,

I'm still experiencing the same issue. Has this problem been solved, or will it be solved?

I use CCS_12.8.1.00005 and mcu_plus_sdk_j722s_11_01_00_15.

Can't I run the examples in the MCU+SDK with CCS? What's the best way to do it? What other way is there?

Thank you.

0 Wen Li 4 months ago

Hello;

Thanks for the question.

The best way to start is following the link below, and run the example "Hello World".

Also, make sure to setup your test platform correctly (Assuming you are using a Linux system)

1. Make sure that you have connected your Linux system to a J722S EVM by using a USB cable

2. Set the SW3/SW4 on the EVM correctly

3. Start the CCS, and select your target "j722s_XDS110.ccxml[Default]"

Best regards

Wen Li

Processors forum