• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 165 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM62A7: How to enable AM62A7 C7X debug

Jason Zeng
Intellectual 395 points

Part Number: AM62A7

firmware version: 10_00_00_05

sdk version : 10_00_00_08

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1609770/am62a7-power-on-probability-does-not-display-the-camera-image/6217627

We are currently attempting to resolve the above issue. Specifically, we are trying to enable the debug level for the C7X firmware to obtain more detailed logging information. However, adding PROFILE=debugduring compilation and replacing the output files did not yield any results. Could you please advise on the correct method to properly enable the debug logging level? Below is my compilation log.
build.log 

  • +1
    TI__Expert 5380 points

    Hi Jason,

    Sorry for the late response about the thread do to mix up in assigning. I suggest try: 

    root@am62axx-evm:/opt# ./vx_app_arm_remote_log.out to show more logs for the remote cores C7x and DM R5.

    Best regards,

    Qutaiba