externally write to the DSP

Stephanie Muka

Prodigy 40 points

Other Parts Discussed in Thread: TMS320C6416T

Can anyone tell me how I can be able to get an external analog signal to the TMS320C6416T DSk and read it on the PC.

I have been trying but I can't read anything externally.

Please assist.

over 13 years ago

0 RandyP over 13 years ago

TI__Guru* 84110 points

Stephanie,

Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages. Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics.

Look in the BSL files that come with the DSK. The dsk_app reads analog input and writes analog output.

You can also go to the TI Wiki Pages and look for the archives of "IW6000" to find a training class and labs that do audio processing on the DSK6416(T).

Regards,
RandyP

If you need more help, please reply back. If this answers the question, please click Verify Answer , below.

0 Stephanie Muka over 13 years ago in reply to RandyP

Prodigy 40 points

I tried to browse over the wiki pages but I couldn't find any answer to my concern.

My problem is still pending

0 RandyP over 13 years ago in reply to Stephanie Muka

TI__Guru* 84110 points

On the TI Wiki Pages, did you search for IW6000?

Did you look at the dsk_app in the BSL folder? Do you have a BSL folder?

Processors

Processors forum

externally write to the DSP