DVI / HDMI instead of LCD (OMAP3503)

Alex Alex97366

Other Parts Discussed in Thread: DM3730

Hi,

I trying to use DVI output instead of LCD for OMAP3503 board.

I've read instruction in VAR_OM35xx_P.bat and I've found out this:

REM Note that if this variable is changed, a XLDR/EBOOT update are required.

What does it mean? Rebuild XLDR/EBOOT or download to target board?

And how do I do it?

Thank you

over 13 years ago

0 Thomas RETAIL over 13 years ago

Prodigy 80 points

Hi Alex,

XLDR/EBOOT update means that you MUST flash XLDR and Eboot into NAND flash using TI utility "pserial.exe" (you can find it in BSP folder\tools\ directory).

See this topic on TI forum: http://e2e.ti.com/support/embedded/wince/f/353/t/117635.aspx

I'm newbie to TI dev on OMAP (I use DM3730 and WINCE7 since one month) and I never flash the bootloader so I can't give you more explanation.

Bon courage (good luck),

Thomas.

0 Jatin Jain over 13 years ago in reply to Thomas RETAIL

TI__Genius 9185 points

Also refer to this link http://processors.wiki.ti.com/index.php/WinCE-TIBSP_Handbook specifically the User Guide and FAQ for more information.

Processors

Processors forum

DVI / HDMI instead of LCD (OMAP3503)