TDA4VH-Q1: yocto-build issue for Ti SDK-10 and TI-SDK-11

# This template file was created by taking the oe-core/meta/conf/bblayers.conf
# file and removing the BBLAYERS section at the end.

# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "7"

BBPATH = "${TOPDIR}"
BBFILES ?= ""

YOCTOROOT = "${@os.path.abspath(os.path.join("${TOPDIR}", os.pardir))}"

# Layers configured by oe-core-setup script
BBLAYERS += " \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-arago/meta-arago-distro \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-arago/meta-arago-extras \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-arago/meta-arago-test \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-qt5 \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-virtualization \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-openembedded/meta-networking \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-openembedded/meta-python \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-openembedded/meta-oe \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-openembedded/meta-gnome \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-openembedded/meta-filesystems \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-openembedded/meta-multimedia \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-lts-mixins \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-ti/meta-ti-extras \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-ti/meta-beagle \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-ti/meta-ti-bsp \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-arm/meta-arm \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-arm/meta-arm-toolchain \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-clang \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/oe-core/meta \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-tisdk/meta-ti-foundational \
	/projects/ceer/ospas120/yocto-sdk-11/degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/sources/meta-edgeai \
"
BBLAYERS += " \
        ${YOCTOROOT}/sources/meta-aptiv-ospas120 \
"
BBLAYERS += " \
        ${YOCTOROOT}/sources/meta-aptiv-coreio \
"

# Name and version of the distribution
DISTRO_NAME = "OSPAS120"
DISTRO_VERSION = "2023.10"
DISTRO_FEED_URI ?= "http://lcpd.itg.ti.com"
BUILD_VARIANT = "${@['prod','rt','systest'][int(d.getVar('ARAGO_RT_ENABLE'))+int(d.getVar('ARAGO_SYSTEST_ENABLE'))*2]}"
TISDK_VERSION ?= "live"
FEEDURIPREFIX ?= "builds/${DISTRO}-kirkstone/${BUILD_VARIANT}/${MACHINE}/latest/packages/"

OPKG_ARGS:remove = "--prefer-arch-to-version"

TI_MIRROR = "http://software-dl.ti.com/processor-sdk-mirror/sources/"
MIRRORS += " \
bzr://.*/.*      ${TI_MIRROR} \n \
cvs://.*/.*      ${TI_MIRROR} \n \
git://.*/.*      ${TI_MIRROR} \n \
gitsm://.*/.*    ${TI_MIRROR} \n \
hg://.*/.*       ${TI_MIRROR} \n \
osc://.*/.*      ${TI_MIRROR} \n \
p4://.*/.*       ${TI_MIRROR} \n \
npm://.*/.*      ${TI_MIRROR} \n \
ftp://.*/.*      ${TI_MIRROR} \n \
https?$://.*/.*  ${TI_MIRROR} \n \
svn://.*/.*      ${TI_MIRROR} \n \
"

# SDK paths and names
SDK_NAME_PREFIX = "ospas120"
SDK_VERSION = "${DISTRO_VERSION}"
SDK_VENDOR = "-${SDK_NAME_PREFIX}"
SDK_NAME = "${SDK_NAME_PREFIX}-${SDK_VERSION}"
SDKPATHINSTALL = "/opt/${SDK_NAME}"

IMAGE_FSTYPES += "tar.xz.md5sum"

# Extra boot files for WIC images
do_image_wic[depends] += "tisdk-uenv:do_deploy"
IMAGE_BOOT_FILES += "uEnv.txt"

# Mask any broken recipes (currently none)
#BBMASK = ""

TCMODEAPPEND ?= "-${TCMODE}"
TMPDIR .= "${TCMODEAPPEND}"

# Start with default set of distro features
DISTRO_FEATURES = "${DISTRO_FEATURES_DEFAULT} ${DISTRO_FEATURES_LIBC}"

# Add additional distro features
DISTRO_FEATURES:append = " pam wayland opengl"
DISTRO_FEATURES:remove = "x11"
#DISTRO_FEATURES:append = " opencl"
DISTRO_FEATURES:append = " vulkan"
DISTRO_FEATURES:append = " opencv"
DISTRO_FEATURES:append = " openmp"

# Normally target distro features will not be applied to native builds:
# Native distro features on this list will use the target feature value
DISTRO_FEATURES_FILTER_NATIVE:append = " opencl opencv openmp"
DISTRO_FEATURES_FILTER_NATIVESDK:append = " opencl opencv openmp"

# Set global runtime providers for major components
ARAGO_SYSVINIT ??= "0"
INIT_MANAGER ?= "${@['systemd','sysvinit'][int(d.getVar('ARAGO_SYSVINIT'))]}"

# Distro-specific package configuration
PACKAGECONFIG:append:pn-systemd = " coredump networkd resolved serial-getty-generator"

# Configure Qt5 flags (GLES is still required for qtdeclarative and qtwebkit)
PACKAGECONFIG_GL:pn-qtbase = "gles2 linuxfb"
PACKAGECONFIG_DISTRO:pn-qtbase = "icu examples accessibility gif gbm kms libinput"
PACKAGECONFIG_FONTS:pn-qtbase = "fontconfig"
PACKAGECONFIG:remove:pn-qtwayland = "xcomposite-egl xcomposite-glx"

# Add gstreamer in package configuration to enable video
PACKAGECONFIG:append:pn-qtmultimedia = " gstreamer"

# Add examples in Qt5 package configurations
PACKAGECONFIG:append:pn-qtcharts = " examples"
#PACKAGECONFIG:append:pn-qtdeclarative = " examples"
PACKAGECONFIG:append:pn-qtlocation = " examples"
PACKAGECONFIG:append:pn-qtmultimedia = " examples"
PACKAGECONFIG:append:pn-qtscript = " examples"
PACKAGECONFIG:append:pn-qtserialport = " examples"
PACKAGECONFIG:append:pn-qtsvg = " examples"
PACKAGECONFIG:append:pn-qtwayland = " examples"
PACKAGECONFIG:append:pn-qtwebengine = " examples"

# Prefer OpenSSL over GnuTLS for curl due to TSU exemptions
PACKAGECONFIG:pn-curl = "${@bb.utils.contains("DISTRO_FEATURES", "ipv6", "ipv6", "", d)} proxy openssl verbose zlib"

PACKAGECONFIG:pn-glmark2 = "drm-gles2 wayland-gles2"

# Set this to empty string to prevent xwayland config from being added
PACKAGECONFIG:pn-weston-init = ""

# Enable testing for opencl and vulkan with piglit
PACKAGECONFIG:append:pn-piglit = " \
    ${@bb.utils.filter("DISTRO_FEATURES", "opencl vulkan", d)} \
    ${@bb.utils.contains("DISTRO_FEATURES", "opengl", "deqp-gles", "", d)} \
    ${@bb.utils.contains("DISTRO_FEATURES", "vulkan", "deqp-vk", "", d)} \
"
PACKAGECONFIG:pn-opengl-es-cts = "${@bb.utils.contains("DISTRO_FEATURES", "wayland", "wayland", "surfaceless", d)}"
PACKAGECONFIG:pn-vulkan-cts = "${@bb.utils.contains("DISTRO_FEATURES", "wayland", "wayland", "surfaceless", d)}"

# Use llvmpipe for better performance with software rendering
# Only available for armv6+ devices
#MESA_GALLIUM_LLVM_PACKAGECONFIG = "gallium-llvm"
#MESA_GALLIUM_LLVM_PACKAGECONFIG:omapl138 = ""
#PACKAGECONFIG:append:pn-mesa = " ${MESA_GALLIUM_LLVM_PACKAGECONFIG}"
#PACKAGECONFIG:append:pn-mesa-pvr = " ${MESA_GALLIUM_LLVM_PACKAGECONFIG}"

# Enable encryption support in open62541
PACKAGECONFIG:append:pn-open62541 = " encrypt"

# Enable netperf intervals/pacing and histogram
PACKAGECONFIG:append:pn-netperf = " intervals histogram"

# Use OpenGL ES2 for SDL2
PACKAGECONFIG_GL:pn-libsdl2 = "gles2"

# Add KMS/DRM backend support
PACKAGECONFIG:append:pn-libsdl2 = " kmsdrm"

# Enable cryptodev/devcrypto engine in OpenSSL 1.1
PACKAGECONFIG:append:pn-openssl = " cryptodev-linux"

# Enable GST_TRACER logging in gstreamer
PACKAGECONFIG:append:pn-gstreamer1.0 = " tracer-hooks coretracers"

# Enable kmssink in gstreamer
PACKAGECONFIG:append:pn-gstreamer1.0-plugins-bad = " kms"

# Enable gstreamer plugin for libcamera
PACKAGECONFIG:append:pn-libcamera = " gst"

# Disable pulseaudio routing in alsa by default
PACKAGECONFIG:remove:pn-alsa-plugins = "pulseaudio"
RDEPENDS:pulseaudio-server:remove = "alsa-plugins-pulseaudio-conf"

# Configure RAMFS for jailhouse linux-demo
JH_RAMFS_IMAGE = "tisdk-jailhouse-inmate"

# Enable UI and scripting for perf
PERF_FEATURES_ENABLE ?= "perf-scripting perf-tui"

# Do not warn on meta-gnome w/o x11
SKIP_META_GNOME_SANITY_CHECK = "1"

ARAGO_KERNEL_SUFFIX ?= ""

# Set real-time kernel suffix
ARAGO_RT_ENABLE ?= "0"
ARAGO_KERNEL_SUFFIX:append = "${@oe.utils.conditional("ARAGO_RT_ENABLE", "1", "-rt", "", d)}"

# Set systest kernel suffix
ARAGO_SYSTEST_ENABLE ?= "0"
ARAGO_KERNEL_SUFFIX:append = "${@oe.utils.conditional("ARAGO_SYSTEST_ENABLE", "1", "-systest", "", d)}"
IMAGE_FSTYPES:remove = "${@['','ubi ubifs'][d.getVar('ARAGO_SYSTEST_ENABLE') == '1']}"

# Enable basic stack and buffer overflow protections
#TARGET_CPPFLAGS += "-fstack-protector -D_FORTIFY_SOURCE=1"
#TARGET_CPPFLAGS += "-fstack-protector"

# Load default preferences
require conf/distro/include/arago-prefs.inc

# Allow branding on top of Arago Distro and Core TI-SDK
# If ARAGO_BRAND is not set in local.conf, default to core
ARAGO_BRAND ??= "core"

#require conf/distro/include/branding-${ARAGO_BRAND}.inc

# Disable polkit's systemd configuration from meta-oe
POLKITAUTH = ""

# Disable meta-virtualization sanity check and warning
SKIP_META_VIRT_SANITY_CHECK = "1"

# Set ENTERPRISE_DISTRO flag to ensure that recipes that have been flagged
# do not attempt to enable features that have potential commercial
# licensing issues.
ENTERPRISE_DISTRO = "1"

# oe-core uses external libav instead of internal libav for gst-ffmpeg. We
# disable by default the codecs in libav that causes issues with shipping an
# Arago based SDK. No need to prevent gst-ffmpeg from being used since we
# disable troublesome software.
LICENSE_FLAGS_ACCEPTED = "commercial_gst-ffmpeg commercial_gstreamer1.0-libav commercial_faad2 non-commercial_netperf"

# Do not package own copy of perl into devkit, rely on host one
ASSUME_PROVIDED += "nativesdk-perl"
BSP_KERNEL_VERSION = "6.6%"

# CONF_VERSION is increased each time build/conf/ changes incompatibly
CONF_VERSION = "2"

#
# Where to place downloads
#
# During a first build the system will download many different source code
# tarballs from various upstream projects. This can take a while, particularly
# if your network connection is slow. These are all stored in DL_DIR. When
# wiping and rebuilding you can preserve this directory to speed up this part
# of subsequent builds. This directory is safe to share between multiple builds
# on the same machine too.
DL_DIR = "${TOPDIR}/../../../../degum_coreIO_Safety_CEER_TDA4_CoreIO_Toolchain/10056038_GP_COMP_OSPAS120_PerformanceController_TDA4_meta_APTIV_BSP/yocto-build/downloads"

#
# Where to place shared-state files
#
# BitBake has the capability to accelerate builds based on previously built
# output. This is done using "shared state" files which can be thought of as
# cache objects and this option determines where those files are placed.
#
# You can wipe out TMPDIR leaving this directory intact and the build would
# regenerate from these files if no changes were made to the configuration.
# If changes were made to the configuration, only shared state files where the
# state was still valid would be used (done using checksums).
SSTATE_DIR = "${TOPDIR}/sstate-cache"

#
# Shared-state files from other locations
#
# As mentioned above, shared state files are prebuilt cache data objects which
# can be used to accelerate build time. This variable can be used to configure
# the system to search other mirror locations for these objects before it
# builds the data itself.
#
# This can be a filesystem directory, or a remote url such as http or ftp.
# These would contain the sstate-cache results from previous builds (possibly
# from other machines). This variable works like fetcher MIRRORS/PREMIRRORS
# and points to the cache locations to check for the shared objects.
#SSTATE_MIRRORS ?= "\
#file://.* http://someserver.tld/share/sstate/ \n \
#file://.* file:///some/local/dir/sstate/"

#
# Where to place the build output
#
# This option specifies where the bulk of the building work should be done and
# where BitBake should place its temporary files and output. Keep in mind that
# this includes the extraction and compilation of many applications and the toolchain
# which can use Gigabytes of hard disk space.
TMPDIR = "${TOPDIR}/arago-tmp"

# By default, DEPLOY_DIR is inside TMPDIR, but can be changed here to be outside
#DEPLOY_DIR = "${TOPDIR}/deploy"

#
# Machine Selection
#
# You need to select a specific machine to target the build with. There are a selection
# of emulated machines available which can boot and run in the QEMU emulator:
#
#MACHINE ?= "arago"

#
# Package Management configuration
#
# This variable lists which packaging formats to enable. Multiple package backends
# can be enabled at once and the first item listed in the variable will be used
# to generate the root filesystems.
# Options are:
#  - 'package_deb' for debian style deb files
#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
#  - 'package_rpm' for rpm style packages
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
# We default to ipk:
PACKAGE_CLASSES ?= "package_ipk"

#
# SDK/ADT target architecture
#
# This variable specified the architecture to build SDK/ADT items for and means
# you can build the SDK packages for architectures other than the machine you are
# running the build on (i.e. building i686 packages on an x86_64 host._
# Supported values are i686 and x86_64
SDKMACHINE ?= "x86_64"

#
# Extra image configuration defaults
#
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
# images. Some of these options are added to certain image types automatically. The
# variable can contain the following options:
#  "dbg-pkgs"       - add -dbg packages for all installed packages
#                     (adds symbol information for debugging/profiling)
#  "dev-pkgs"       - add -dev packages for all installed packages
#                     (useful if you want to develop against libs in the image)
#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
#  "tools-debug"    - add debugging tools (gdb, strace)
#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng valgrind (x86 only))
#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
#  "debug-tweaks"   - make an image suitable for development
#                     e.g. ssh root access has a blank password
# There are other application targets that can be used here too, see
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
# We default to enabling the debugging tweaks.
EXTRA_IMAGE_FEATURES = "debug-tweaks"

#
# Additional image features
#
# The following is a list of additional classes to use when building images which
# enable extra features. Some available options which can be included in this variable
# are:
#   - 'buildstats' collect build statistics
#   - 'image-swab' to perform host system intrusion detection
# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
USER_CLASSES ?= "buildstats"

# By default disable interactive patch resolution (tasks will just fail instead):
PATCHRESOLVE = "noop"

# By default the machine configuration file sets the IMAGE_FSTYPES.  But if you
# would like to add additional file system types you can uncomment the
# following line and add the additional IMAGE_FSTYPES you want created
# as part of the build flow.  Some common types are listed below and you
# can remove the ones you do not want.
# IMAGE_FSTYPES += "jffs2 cramfs ext2.gz ext3.gz squashfs ubi tar.gz tar.bz2 cpio"

#
# Parallelism Options
#
# These two options control how much parallelism BitBake should use. The first
# option determines how many tasks bitbake should run in parallel:
#
# BB_NUMBER_THREADS ?= "1"
#
# The second option controls how many processes make should run in parallel when
# running compile tasks:
#
# PARALLEL_MAKE ?= "-j 1"
#
# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
# be appropriate for example
#
# NOTE: By default, bitbake will choose the number of processeors on your host
# so you should not need to set this unless you are wanting to lower the number
# allowed.
#

DISTRO  = "aptiv-ospas120"
MACHINE ?= "j784s4-ospas120"

# Set terminal types by default it expects gnome-terminal
# but we chose xterm
TERMCMD = "${XTERM_TERMCMD}"
TERMCMDRUN = "${XTERM_TERMCMDRUN}"

# Don't generate the mirror tarball for SCM repos, the snapshot is enough
BB_GENERATE_MIRROR_TARBALLS = "0"

# Uncomment this to remove work directory after packaging to save disk space
#INHERIT += "rm_work"

# Keep one set of images by default
RM_OLD_IMAGE = "1"

# Enable local PR service for binary feeds
PRSERV_HOST = "localhost:0"

# Enable hash equiv server
BB_SIGNATURE_HANDLER = "OEEquivHash"
BB_HASHSERVE = "auto"

# It is recommended to activate "buildhistory" for testing the PR service
INHERIT += "buildhistory"
BUILDHISTORY_COMMIT = "1"

INHERIT += "image-buildinfo"
IMAGE_BUILDINFO_VARS:append = " DATETIME DISTRO_NAME IMAGE_BASENAME MACHINE TUNE_PKGARCH"
IMAGE_BUILDINFO_VARS:append = " MACHINE_FEATURES DISTRO_FEATURES COMMON_FEATURES IMAGE_FEATURES"
IMAGE_BUILDINFO_VARS:append = " TUNE_FEATURES TARGET_FPU"

INHERIT += "own-mirrors"
SOURCE_MIRROR_URL = "http://software-dl.ti.com/processor-sdk-mirror/sources/"

INHERIT += "rm_work"
RM_WORK_EXCLUDE += "u-boot-ospas120 aptiv-coreio-tiny-initramfs"

IMAGE_INSTALL:append = "mtd-utils"

PACKAGECONFIG:append:pn-glib-2.0 = "libpcre2-8" 

BBMASK += "meta-aptiv-ospas120/recipes-bsp/u-boot/"

LICENSE_FLAGS_ACCEPTED:append = "commercial_ffmpeg commercial"
ASSUME_PROVIDED:remove = "tar-native"

#@TYPE: Machine
#@NAME: OSPAS120 based on TI TDA4 J784S4
#@DESCRIPTION: Machine configuration for the Aptiv's J784S4 based OSPAS120

require conf/machine/include/j784s4.inc

PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ospas120"
PREFERRED_PROVIDER_u-boot = "u-boot-ospas120"

TFA_K3_USART = "0x4"
OPTEE_K3_USART = "0x4"

KERNEL_DEVICETREE_PREFIX = " \
    ti/k3-j784s4 \
    ti/k3-fpdlink \
    ti/k3-j7200-evm-mcspi-loopback \
    ti/k3-am69-sk \
"

KERNEL_DEVICETREE = " \
    ti/k3-j784s4-ospas120.dtb \
"

UBOOT_MACHINE = "j784s4_evm_a72_defconfig"

IMAGE_FSTYPES = "tar.xz wic.xz ext4"