• Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 323 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EtherCAT demo compilation error on AM335

Stan Breitlow
Prodigy 20 points
Other Parts Discussed in Thread: SYSBIOS

I am getting this error when I compile.

Error:

Could not open source file "C:/ti/am335x_sysbios_ind_sdk_1.0.0.2/sdk/examples/ethercat/Debug/configPkg/package/cfg/ethercat_pea8fnv.h"

This directory contains:

ethercat_pea8fnv.mak

ethercat_pea8fnv.cfg

ethercat.xea8fnv.mak

Is the header located somewhere else? 

  • Expert 2380 points

    Did you build the .cfg file after importing project into CCS ?

    Which version of CCS are you using?

  • TI__Genius 9190 points

    Hello,

    Please make sure you are trying to build the demo that is located in SDK\examples\ethercat and not the one located in sdk\protocols\ethercat because the latter will require that you get the stack from ETG and then you will need to install a patch.   To get up and running with the example code you should be able to build the first one I mentioned without any modification. 

    Please make sure you are using the latest CCS.  I origionally had a problem building this project when I was using a version older than v 5.1.0.09.