AM335x Ethernet Question

Paul Joseph

Other Parts Discussed in Thread: AM3359

For the AM3359 with the two port ethernet, I need to have one port for internal communications and one for external, so really on two separate networks, is this possible? Any thoughts?

over 13 years ago

0 Mugunthan V N over 13 years ago

TI__Intellectual 2750 points

Paul

Look for Dual Mac Mode support in CPSW, which will provide you Two separate ethernet interface.

with regards

Mugunthan V N

0 Paul Joseph over 13 years ago in reply to Mugunthan V N

Expert 2795 points

OK, thank you, just to confirm, one MAC will be with fixed for the internal connection and the other will be served fronm DHCP. Just want to be sure each MAC can be fully indpeendent in terms of being served from two different DHCP. Thank you.

0 Mugunthan V N over 13 years ago in reply to Paul Joseph

TI__Intellectual 2750 points

Paul

Yes, in Dual EMac mode both ethernet interface will be separated and can be used to communicate with two different network.

with regards

Mugunthan V N

Processors

Processors forum

AM335x Ethernet Question