• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 97 subscribers
  • Views 126 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

emifa interface problem

vasu vallabhaneni
Prodigy 250 points

Hi

         We are working with EMIFA interface for Micron NAND flash. we are using sfh.exe. when ever we were trying to erase the nand flash chip select(cs) cs3 of processor pin is geting enabled. in our actual interface board we routed cs2 to the device. How can I deselect the CS3 and how can I enable the CS2.

Thanks

VAsu Vallabhaneni