• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 143 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM368IPNC board bring up

Mayank Agarwal
Expert 2600 points
Hi, If anyone can tell the steps for bringing up the customised DM368IPNC target board.Is there any TI doc which we can follow to understand the board bring up procedure of DM368IPNC board.Pl ease clear the following doubts. 1.On the new customised board if after installing the ubl and uboot we can get the DM368 prompt and after installing the kernel and fs image we can get it working. 2.what are the possible hindrances which we can face in board bring up procedure. Please guide regarding the above. Thanks and Regards, Mayank
  • 0
    Guru 31670 points

    Mayank,

    I guess it will be difficult to guide a porting activity through a forum. It all depends on the differences that you've made when compared to the reference IPNC design. Also to comment on the changes required the schematics and other related information about the board will be required.