• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 199 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About C code to be executed on TMS320c6713 development board using CCS.

pravin latane
Prodigy 30 points

Hi TI,

I am just looking for filter implementation to do interpolation/decimation to be executed on TMS320c6713 development board using CCS.

bye

  • 0
    TI__Guru* 84110 points

    Hi Pravin Latane,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages. Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics.

    The link that Rahul Prabhu gave you in your original thread would be a good place to start. Look through the libraries on that Wiki page. If you do not find what you need, search the Wiki for your specific keywords. But most of what we have to offer are on that page. I will mark that thread answered so we can continue the discussion here.

    Please let us know if you find what you wanted and what those solutions are.

    Regards,
    RandyP

     

    If you need more help, please reply back. If this answers the question, please click  Verify Answer  , below.