Data log in UART Boot Host

Sandeep Nayak

Hi,

We are working towards flashnig the SPI Flash.Everything is happening. However we are unable to see any activity in the UART2 of EVM.

We are following all the Steps given in the Boot Document 'spraat2e.pdf'.

How do we see/log the BOOT process data in UART mode software ?

Regards,

Sandeep Nayak

over 13 years ago

0 Rahul Prabhu over 13 years ago

TI__Guru** 116770 points

Sandeep,

Please mention the device the next time you make a new post on e2e. From some of your other posts, I realize you are using C6748 but you also have posted that you were working on a custom board rather than the EVM. Could you confirm that you are trying this test on the EVM and not the custom hardware.

If you are trying this on the EVM, I would recommend you to try the prebuilt AIS Boot images that we provide on this wiki and try out the LED blinking example on your device.

http://processors.wiki.ti.com/index.php/Boot_Images_for_OMAP-L138

Another useful wiki for Flashing on EVM and custom boards:

http://processors.wiki.ti.com/index.php/Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L138

Let us know if you are able to make any progress with the flashing examples.

Regards,

Rahul

Processors

Processors forum

Data log in UART Boot Host