• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 97 subscribers
  • Views 152 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Multi-ch Capture and display problem on DM8168 EVM board+Vs child Board, DVRRDK_02.00.00.23

Xavier
Genius 3180 points

Hi,

I do developpment on the DM8168 EVM board+Vs child Board, and DVRRDK_02.00.00.23 is used to do software developmment.

And i see the multi capture-encode-decode-display demo.

And i find that only 0-7 channels (total 0-15 D1 video signal ) can be display on the on chip-Hdmi?

Why can the other 8 channels displayed?

How the capture video channel is mapped to the display channel, using swMsaics Link？

thank you？

xavier