tvp7002 with RDK

ranchu

Guru 20755 points

Other Parts Discussed in Thread: TVP7002

Hello,

I would like to use hd format with rdk. As I understand the rdk version does not support tvp7002, therefore we should add it to the bsp driver, and also to ducati m3. Is there some guidelines as to how to add tvp7002 to rdk ?

Thank you,
Ran

over 13 years ago

0 HardikShah over 13 years ago

TI__Mastermind 20245 points

Hi,

You can refer to DM81xx_DVRRDK_External_Video_Device_Configuration.pdf docs on how to configure external devices.

Regards,

Hardik Shah

0 ranchu over 13 years ago in reply to HardikShah

Guru 20755 points

Hi Hardik,

Thank you for the reply. I have RDK version 1.9.0.19, and I did not find this document there. Is It a new document ?

Best Regards,

Ran

0 ranchu over 13 years ago in reply to HardikShah

Guru 20755 points

Hi Hardik,

I don't have this documnet, but is it possible to configure RDK to capture video with hd or sd (I mean that the same version in m3 will supoort both formats) ? If it is possible to attach this documnet it will be useful.

Thank you very much,

Ran

0 HardikShah over 13 years ago in reply to ranchu

TI__Mastermind 20245 points

Yes,

Same M3 binary will support HD and SD. Its all configurable from A8 side. Its wont be possible to attach document here. You can ask for latest RDK release to your local TI representative.

Regards,

Hardik Shah

0 Cory Tusar over 13 years ago in reply to HardikShah

Intellectual 475 points

HardikShah said:

You can ask for latest RDK release to your local TI representative.

Hardik-

Is there an RDK release that's newer than 01.09.00.19?

Is there a centralized location where RDK releases are announced, or do I need to ping on my TI FAE every month?

Thanks,

-Cory

Processors

Processors forum

tvp7002 with RDK