• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 318 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6745 DSP

gaurav pahuja
Prodigy 100 points

Other Parts Discussed in Thread: TMS320C6745

HI,

I am using TMS320C6745 DSP and XDS100v2 emulator for programming support. In my DSP there are no EMU pins.

So I want to clarify that in 14 pin JTAG connector what I can do with EMU0/1 pins, PULL UP, PULL DOWN or NC.

Regards

Gaurav

  • 0
    TI__Guru* 84110 points

    Gaurav,

    A weak 10k-Ohm pull up should work well for you as a safe choice. But that is probably not required. Most emulator pods will be driving EMU0/1, so just not routing these anywhere would work fine for you.

    Regards,
    RandyP