Processors

Processors forum

State Resolved
Locked Locked
Replies 3 replies
Subscribers 99 subscribers
Views 2301 views
Users 0 members are here

Support feedback

Options

Options

Related

Did beaglebone support ethercat?

hank wu

Intellectual 695 points

Dear All

Did Beaglebone support EtherCat?

After reading the http://beagleboard.org/static/BBSRM_latest.pdf, I did't find any article about Ethercat.

over 13 years ago

0 Frank Walzer over 13 years ago

TI__Mastermind 44306 points

No, not for EtherCAT slave. You need hardware that has both PRU MIIs connected...

Only ICE and IDK have that at the moment and are supported by the IA-SDK.

If you need an EtherCAT master then a normal Ethernet port is sufficient. You can find some open source EtherCAT masters and many commercial solutions.

Regards.

0 hank wu over 13 years ago in reply to Frank Walzer

Intellectual 695 points

Dear Frank

Thanks for your help.

So at the moment we need the hardware below?

http://www.ti.com/tool/tmdxidk3359

http://www.ti.com/tool/tmdxice3359

0 Maneesh over 13 years ago in reply to hank wu

TI__Intellectual 1835 points

Correct. These are the two tools.

thanks.