Uboot error

Shinu Mary Varghese

Hi,

I have loaded uboot-1.2.0-dm355-leopard.bin and ubl on dm355-leopard board and its working fine .But when i tried to load uboot-1.2.0-dm355-ipnc-u-1.0.

3.bin its loading but while booting i am getting following errors.

Errors
====
Chip initialization passed!
TI UBL Version: 1.30
Booting Catalog Boot Loader
BootMode = NAND
Starting NAND Copy...
Valid MagicNum found.
DONE
Jumping to entry point at 0x81080000.

How can i solve this problem?

Thanks

over 13 years ago

0 Marko Shink over 13 years ago

Genius 3475 points

Hi,

You can use "dm3xx_sd_boot" utility to reflash bricked board:

https://www.leopardimaging.com/Download.html (look under : DM355 / DM365 UBL, u-boot, Kernel and filesys on Leopardboard:)

Regards.

0 Renjith Thomas over 13 years ago

Guru 31670 points

Steffi,

Why are you trying to load IPNC's u-boot to Leopard board? Both are different hardwares and the DDR/NAND timings will also be different. I'm not sure, but the serial port also could be different.

-Renjith

Processors

Processors forum

Uboot error