USB Connector pinout error on ezdsp 5515 schematic?

Hi Mike,

You are correct.

Pin 2 is the D- pin and Pin 3 is the D+ pin.

In the schematics, you see U6.8 (USBDM) connected to J2.2 (D- by definition, incorrectly labeled D+ in the J2 symbol).

The layout also reflects the correct routing for D- from U6.8 to J2.2

I will ask for the schematics to be corrected.

FT2232D Datasheet: http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232D.pdf

Regards,
Mark