UART signals

alex dodo

Hi,

I am trying to realize a connection between my ezdsp5535 and PAN1325ETU via UART using RTS and CTS signals but I don't know how to use the macros from CSL because they are not recognized in my project. Is there something I must include? Any kind of reference would be really helpful

Thanks

Alexa

over 13 years ago

0 Mark M over 13 years ago

TI__Mastermind 30110 points

Hi Alex,

Were you able to get the CSL code running?

The Spectrum Digital examples show how to include the CSL - http://support.spectrumdigital.com/boards/ezdsp5535/revc/

What specifically are you getting stuck on?

Hope this helps,
Mark

0 alex dodo over 13 years ago in reply to Mark M

Prodigy 140 points

The CSL code is running but I can't use macros. All the functions work fine for the UART(UART_init,UART_read,UART_write) but I'm trying to control CTS and RTS with the macros UART_isRts or UART_ctsOn and these are not recognized.

Processors

Processors forum

UART signals