VoLIB and Sitara

Rinzai Bell

Will the TI AEC (Acoustic Echo Cancellation) code and the VOLIB code library, that are both currently supported on the C6x DSPs, be supported on the Cortex A-8s running under Linux?

Rinzai

over 13 years ago

0 Rahul Prabhu over 13 years ago

TI__Guru** 116740 points

Rinzai,

Welcome to TI e2e forums. Your question pertains to Cortex-A8 so this may not be the best forum for you to seek answers to these questions. I will move this thread to the AM forums so the right experts can look into this.

If you look at the AEC product folder on ti.com, there is a AEC library already supported on Cortex A8 platforms. The code will be ARM object code and should be OS independent.

http://www.ti.com/tool/telecomlib

You will also find this application notes of you interest as the appendix contains C code that can also be run on Cortex A8.

http://www.ti.com/dsp/docs/litabsmultiplefilelist.tsp?sectionId=3&tabId=409&literatureNumber=spra063&docCategoryId=1&familyId=44

I am not sure about the VoLib implementation on ARM, you may want to download the library to see if there is hardware independent C code implementations of functions that you can use on ARM.

Regards,

Rahul

Processors

Processors forum

VoLIB and Sitara