• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Chest ECG Signals on ADS1298PDF FE + EVM5515

Ekrem Bayraktar
Expert 1190 points

Hi all,

I cannot observe chest signals (V1,V2...V6) on LCD when I build and load ECG_NonBios.out. But I observe ECG signals on I, II, III, aVR, aVL, aVF, any idea?

Regards.

  • 0
    TI__Mastermind 43915 points

    Hi Ekrem,

    I assume you are using the EVM hardware with a patient simulator? Not sure what your software looks like which is running but you should be able to use the ECG-FE software available online to view the chest leads V1-V6 if properly connected to the simulator.

    Regards,

    Tony Calabria