• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 97 subscribers
  • Views 136 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Ethernet Statistics register reading on port basis

Krishna Murthy1
Prodigy 10 points

Hi,

I have a requirement where i enable the ethernet switch and both the ports.

To get updated port statistics data i have enabled "STAT_PORT_EN" register for port 1 and 2.

For reading port1  "Good Rx Frames" information what is the procedure to be followed?

Section 14.3.2.20 doesn't explain much about the port basis register reading.

Regards,

Krishna