• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 272 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

L138 Smart Grid Infrastructure EVM processor speed

Jeff Stringer
Intellectual 320 points
Other Parts Discussed in Thread: OMAPL138

Can anyone tell me the clock speed of the OMAPL138 on the SGI EVM board?  And how can you tell, i.e. is there some code you can check?  I did 'cat /proc/cpuinfo' but it doesn't say the cpu MHz.

  • 0
    TI__Expert 8785 points

    The OMAPL138 on the SGI EVM is currently running at 300Mhz.

    The CPU speed is controlled by the CPUFreq driver.  To get the current CPU speed, please run the following command:

         root@arago:~# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq


    Regards,
    Christina