LCD rotation and VRFB

I   find a passage in the WinCE-BSP ARM-A8 User Guide- “Preview does not work when the BSP 1.x is built with VRFB enabled and if you dont have the CE6 Nov 2010 monthly update installed on your setup. The Nov 2010 CE6 monthly update fixes the stride issue and Preview will work with VRFB enabled after this update is applied.”

where can I downloade "CE6 Nov 2010 monthly update"

Hi Yuanjun,

Until recently MSFT had all of the updates and rollups post R3 available for download.  However it looks like they have pulled all of the older monthly updates and yearly rollups prior to the 2011 Product Update Rollup.  Fortunately if you install the following rollup it should include the changes you are looking for.

Windows Embedded CE 6.0 Cumulative Product Update Rollup Package (through 12/31/2011)
http://www.microsoft.com/en-us/download/details.aspx?id=28753

 Hi,Adeneo Embedded support team

     Thank you for your answer, there is a Sentencein your answer-----" we observe when using high resolution camera streams or selecting DVI with a high resolution display output. "，what are the high resolution camera stream and  high resotution display? My LCD is 480*800，camera sensor is ov56640. Whether I need to selectc lower resolution camera and LCD? 

You might be able to have it work if you choose a low resolution for your camera (it depends on the resolutions supported and exposed by your driver), and as you cannot change your LCD resolution, maybe selecting a lower pixel clock (=> lower refresh rate) will help as well.