L138/C6748 Development Kit camera sensor example

ShilpaByrichetty

Intellectual 985 points

Can anyone please point us to any example/ demo that can test the camera sensor on L138/C6748 Development Kit (LCDK)?

Shilpa.

over 13 years ago

0 Rahul Prabhu over 13 years ago

TI__Guru** 116170 points

Shilpa,

What kind of camera sensor are you using with the LCDK?

If you have a composite input D1 camera(640x480 resolution), you can look at the code for the face detect demo provided in the C6SDK for OMAPL devices.

I have provided the link to the user guide for the SDK:

http://processors.wiki.ti.com/index.php/BIOS_C6SDK_2.0_User_Guide

Regards,

Rahul

0 ShilpaByrichetty over 13 years ago in reply to Rahul Prabhu

Intellectual 985 points

Rahul,

We need to connect LI-CAM-IMX036 camera via the Leopard Imaging Camera Sensor Input (36-pin ZIP connector). Do you have any example with a camera connected to Leopard Imaging Camera Sensor Input (36-pin ZIP connector). Thank you for your immediate reply. Appreciate your help on this.

Shilpa.

0 Rahul Prabhu over 13 years ago in reply to ShilpaByrichetty

TI__Guru** 116170 points

Shilpa,

Okay, I understand. There may not be an existing example/demo on the LCDK board with the leopard imaging sensor yet but I can point you to some starting code that was validated on the EVM. You should be able to migrate this code to the LCDK platform.

This code is distributed from the logicPD website. If you have a login you should be able to access their entire package. However if you don`t have the EVM you wont be able to register so I am attaching the source code for the ARM and DSP interface with the image sensor here.

6758.OMAPL138_Image_sensor_test.zip

Hope this helps.

Regards,

Rahul

Processors

Processors forum

L138/C6748 Development Kit camera sensor example