Trying to access DM365 based camera (with IPNC 3.0) using ONVIF device manager

mahesh adsul

Hello,

I am using IPNC 3.0 release version for my DM365 based camera.

I am using ONVIF device manager to access the camera.

I am able to search the device using ONVIF device manager, It show "ONVIF compliant device" after auto search.

And den gives following options on screen

Identification
Time settings
Maintenance
Network settings
User management
Certificates
System log
Relays
Web page
Events

and

Live video
Video Streaming
Iamging settings
Metatdata
Profiles

When I tried to click on any of above option (except Web page) it Giver error

"the server committed protocol violation. section = responsestatusline"

But I can access "web Page" option of that page and it starts showing live video streaming.

Kindly help me in resolving this issue .

Regards

Mahesh

0 Barath Silvanlabs over 13 years ago

Hi Mahesh,

The IPNC 3.0 reference design has been tested only with Onvif tool 11.12. Please use the Onvif tool to make sure you pass all the tests.

0 mahesh adsul over 13 years ago in reply to Barath Silvanlabs

Yes, I am aware with that but since I do not have that tool, I used ONVIF device manager and tried to explore things.

My cam got detected as "ONVIF compliant device" but could not access the other settings shown on screen.

So wanted to know do I need to do something so that those settings will be accessible for me.

Thanks n Regards

Mahesh

Processors forum