This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to make spi device file?

Other Parts Discussed in Thread: PMP

Hi

I want to  use SPI .

 After enabling "McSPI driver for OMAP/TI81XX" in kernel compile option(make menuconfig), after booting that kernel, there is no /dev/spidev* device file. Why?

 I using linux-2.6.37-psp04.04.00.01.

  • Try enabling "User mode SPI device driver support" in the same kernel config menu.

  • Thank you for reply

    I try enabling "User mode SPI device driver support", but I could not get well.

    #
    # Automatically generated make config: don't edit
    # Linux/arm 2.6.37 Kernel Configuration
    # Tue Jul 17 21:37:18 2012
    #
    CONFIG_ARM=y
    CONFIG_SYS_SUPPORTS_APM_EMULATION=y
    CONFIG_GENERIC_GPIO=y
    # CONFIG_ARCH_USES_GETTIMEOFFSET is not set
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_HAVE_PROC_CPU=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_HAVE_LATENCYTOP_SUPPORT=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    CONFIG_HARDIRQS_SW_RESEND=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_RWSEM_GENERIC_SPINLOCK=y
    CONFIG_ARCH_HAS_CPUFREQ=y
    CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_NEED_DMA_MAP_STATE=y
    CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
    CONFIG_ARM_L1_CACHE_SHIFT_6=y
    CONFIG_VECTORS_BASE=0xffff0000
    CONFIG_ARM_PATCH_PHYS_VIRT=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
    CONFIG_CONSTRUCTORS=y
    CONFIG_HAVE_IRQ_WORK=y
    
    #
    # General setup
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_BROKEN_ON_SMP=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_CROSS_COMPILE=""
    CONFIG_LOCALVERSION=""
    # CONFIG_LOCALVERSION_AUTO is not set
    CONFIG_HAVE_KERNEL_GZIP=y
    CONFIG_HAVE_KERNEL_LZMA=y
    CONFIG_HAVE_KERNEL_LZO=y
    CONFIG_KERNEL_GZIP=y
    # CONFIG_KERNEL_LZMA is not set
    # CONFIG_KERNEL_LZO is not set
    # CONFIG_SWAP is not set
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_POSIX_MQUEUE_SYSCTL=y
    CONFIG_BSD_PROCESS_ACCT=y
    # CONFIG_BSD_PROCESS_ACCT_V3 is not set
    # CONFIG_TASKSTATS is not set
    # CONFIG_AUDIT is not set
    # CONFIG_HAVE_GENERIC_HARDIRQS is not set
    # CONFIG_SPARSE_IRQ is not set
    
    #
    # RCU Subsystem
    #
    CONFIG_TINY_RCU=y
    # CONFIG_PREEMPT_RCU is not set
    # CONFIG_TREE_RCU_TRACE is not set
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=17
    # CONFIG_CGROUPS is not set
    CONFIG_NAMESPACES=y
    # CONFIG_UTS_NS is not set
    # CONFIG_IPC_NS is not set
    # CONFIG_USER_NS is not set
    # CONFIG_PID_NS is not set
    # CONFIG_NET_NS is not set
    # CONFIG_SYSFS_DEPRECATED is not set
    # CONFIG_RELAY is not set
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_RD_GZIP=y
    CONFIG_RD_BZIP2=y
    CONFIG_RD_LZMA=y
    CONFIG_RD_LZO=y
    CONFIG_CC_OPTIMIZE_FOR_SIZE=y
    CONFIG_SYSCTL=y
    CONFIG_ANON_INODES=y
    # CONFIG_EMBEDDED is not set
    CONFIG_UID16=y
    CONFIG_SYSCTL_SYSCALL=y
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    CONFIG_KALLSYMS_EXTRA_PASS=y
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_TIMERFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_AIO=y
    CONFIG_HAVE_PERF_EVENTS=y
    CONFIG_PERF_USE_VMALLOC=y
    
    #
    # Kernel Performance Events And Counters
    #
    # CONFIG_PERF_EVENTS is not set
    # CONFIG_PERF_COUNTERS is not set
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_PCI_QUIRKS=y
    CONFIG_SLUB_DEBUG=y
    CONFIG_COMPAT_BRK=y
    # CONFIG_SLAB is not set
    CONFIG_SLUB=y
    # CONFIG_PROFILING is not set
    CONFIG_HAVE_OPROFILE=y
    CONFIG_KPROBES=y
    CONFIG_KRETPROBES=y
    CONFIG_HAVE_KPROBES=y
    CONFIG_HAVE_KRETPROBES=y
    CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
    CONFIG_HAVE_CLK=y
    
    #
    # GCOV-based kernel profiling
    #
    # CONFIG_GCOV_KERNEL is not set
    CONFIG_HAVE_GENERIC_DMA_COHERENT=y
    CONFIG_SLABINFO=y
    CONFIG_RT_MUTEXES=y
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    # CONFIG_MODULE_FORCE_LOAD is not set
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    CONFIG_MODVERSIONS=y
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_BLOCK=y
    # CONFIG_LBDAF is not set
    # CONFIG_BLK_DEV_BSG is not set
    # CONFIG_BLK_DEV_INTEGRITY is not set
    
    #
    # IO Schedulers
    #
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"
    # CONFIG_INLINE_SPIN_TRYLOCK is not set
    # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
    # CONFIG_INLINE_SPIN_LOCK is not set
    # CONFIG_INLINE_SPIN_LOCK_BH is not set
    # CONFIG_INLINE_SPIN_LOCK_IRQ is not set
    # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
    CONFIG_INLINE_SPIN_UNLOCK=y
    # CONFIG_INLINE_SPIN_UNLOCK_BH is not set
    CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
    # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
    # CONFIG_INLINE_READ_TRYLOCK is not set
    # CONFIG_INLINE_READ_LOCK is not set
    # CONFIG_INLINE_READ_LOCK_BH is not set
    # CONFIG_INLINE_READ_LOCK_IRQ is not set
    # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
    CONFIG_INLINE_READ_UNLOCK=y
    # CONFIG_INLINE_READ_UNLOCK_BH is not set
    CONFIG_INLINE_READ_UNLOCK_IRQ=y
    # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
    # CONFIG_INLINE_WRITE_TRYLOCK is not set
    # CONFIG_INLINE_WRITE_LOCK is not set
    # CONFIG_INLINE_WRITE_LOCK_BH is not set
    # CONFIG_INLINE_WRITE_LOCK_IRQ is not set
    # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
    CONFIG_INLINE_WRITE_UNLOCK=y
    # CONFIG_INLINE_WRITE_UNLOCK_BH is not set
    CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
    # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
    # CONFIG_MUTEX_SPIN_ON_OWNER is not set
    # CONFIG_FREEZER is not set
    
    #
    # System Type
    #
    CONFIG_MMU=y
    # CONFIG_ARCH_AAEC2000 is not set
    # CONFIG_ARCH_INTEGRATOR is not set
    # CONFIG_ARCH_REALVIEW is not set
    # CONFIG_ARCH_VERSATILE is not set
    # CONFIG_ARCH_VEXPRESS is not set
    # CONFIG_ARCH_AT91 is not set
    # CONFIG_ARCH_BCMRING is not set
    # CONFIG_ARCH_CLPS711X is not set
    # CONFIG_ARCH_CNS3XXX is not set
    # CONFIG_ARCH_GEMINI is not set
    # CONFIG_ARCH_EBSA110 is not set
    # CONFIG_ARCH_EP93XX is not set
    # CONFIG_ARCH_FOOTBRIDGE is not set
    # CONFIG_ARCH_MXC is not set
    # CONFIG_ARCH_STMP3XXX is not set
    # CONFIG_ARCH_NETX is not set
    # CONFIG_ARCH_H720X is not set
    # CONFIG_ARCH_IOP13XX is not set
    # CONFIG_ARCH_IOP32X is not set
    # CONFIG_ARCH_IOP33X is not set
    # CONFIG_ARCH_IXP23XX is not set
    # CONFIG_ARCH_IXP2000 is not set
    # CONFIG_ARCH_IXP4XX is not set
    # CONFIG_ARCH_DOVE is not set
    # CONFIG_ARCH_KIRKWOOD is not set
    # CONFIG_ARCH_LOKI is not set
    # CONFIG_ARCH_LPC32XX is not set
    # CONFIG_ARCH_MV78XX0 is not set
    # CONFIG_ARCH_ORION5X is not set
    # CONFIG_ARCH_MMP is not set
    # CONFIG_ARCH_KS8695 is not set
    # CONFIG_ARCH_NS9XXX is not set
    # CONFIG_ARCH_W90X900 is not set
    # CONFIG_ARCH_NUC93X is not set
    # CONFIG_ARCH_TEGRA is not set
    # CONFIG_ARCH_PNX4008 is not set
    # CONFIG_ARCH_PXA is not set
    # CONFIG_ARCH_MSM is not set
    # CONFIG_ARCH_SHMOBILE is not set
    # CONFIG_ARCH_RPC is not set
    # CONFIG_ARCH_SA1100 is not set
    # CONFIG_ARCH_S3C2410 is not set
    # CONFIG_ARCH_S3C64XX is not set
    # CONFIG_ARCH_S5P64X0 is not set
    # CONFIG_ARCH_S5P6442 is not set
    # CONFIG_ARCH_S5PC100 is not set
    # CONFIG_ARCH_S5PV210 is not set
    # CONFIG_ARCH_S5PV310 is not set
    # CONFIG_ARCH_SHARK is not set
    # CONFIG_ARCH_TCC_926 is not set
    # CONFIG_ARCH_LH7A40X is not set
    # CONFIG_ARCH_U300 is not set
    # CONFIG_ARCH_U8500 is not set
    # CONFIG_ARCH_NOMADIK is not set
    # CONFIG_ARCH_DAVINCI is not set
    CONFIG_ARCH_OMAP=y
    # CONFIG_PLAT_SPEAR is not set
    
    #
    # TI OMAP Common Features
    #
    # CONFIG_ARCH_OMAP1 is not set
    CONFIG_ARCH_OMAP2PLUS=y
    
    #
    # OMAP Feature Selections
    #
    # CONFIG_OMAP_RESET_CLOCKS is not set
    CONFIG_TI816X_SMARTREFLEX=y
    CONFIG_OMAP_MUX=y
    # CONFIG_OMAP_MUX_DEBUG is not set
    CONFIG_OMAP_MUX_WARNINGS=y
    # CONFIG_OMAP_MCBSP is not set
    CONFIG_OMAP_MBOX_FWK=y
    CONFIG_OMAP_MBOX_KFIFO_SIZE=256
    CONFIG_OMAP_IOMMU=y
    # CONFIG_OMAP_IOMMU_DEBUG is not set
    CONFIG_OMAP_MPU_TIMER=y
    # CONFIG_OMAP_32K_TIMER is not set
    CONFIG_OMAP_DM_TIMER=y
    # CONFIG_OMAP_PM_NONE is not set
    CONFIG_OMAP_PM_NOOP=y
    
    #
    # TI OMAP2/3/4 Specific Features
    #
    CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
    # CONFIG_ARCH_OMAP2 is not set
    # CONFIG_ARCH_OMAP3 is not set
    # CONFIG_ARCH_OMAP4 is not set
    CONFIG_ARCH_TI81XX=y
    CONFIG_ARCH_TI816X=y
    # CONFIG_ARCH_TI814X is not set
    
    #
    # OMAP Board Type
    #
    
    #
    # TI81XX Board Type
    #
    CONFIG_MACH_TI8168EVM=y
    
    #
    # Processor Type
    #
    CONFIG_CPU_32v6K=y
    CONFIG_CPU_V7=y
    CONFIG_CPU_32v7=y
    CONFIG_CPU_ABRT_EV7=y
    CONFIG_CPU_PABRT_V7=y
    CONFIG_CPU_CACHE_V7=y
    CONFIG_CPU_CACHE_VIPT=y
    CONFIG_CPU_COPY_V6=y
    CONFIG_CPU_TLB_V7=y
    CONFIG_CPU_HAS_ASID=y
    CONFIG_CPU_CP15=y
    CONFIG_CPU_CP15_MMU=y
    
    #
    # Processor Features
    #
    CONFIG_ARM_THUMB=y
    # CONFIG_ARM_THUMBEE is not set
    # CONFIG_CPU_ICACHE_DISABLE is not set
    # CONFIG_CPU_DCACHE_DISABLE is not set
    # CONFIG_CPU_BPREDICT_DISABLE is not set
    CONFIG_ARM_L1_CACHE_SHIFT=6
    CONFIG_ARM_DMA_MEM_BUFFERABLE=y
    CONFIG_CPU_HAS_PMU=y
    # CONFIG_ARM_ERRATA_430973 is not set
    # CONFIG_ARM_ERRATA_458693 is not set
    # CONFIG_ARM_ERRATA_460075 is not set
    # CONFIG_ARM_ERRATA_743622 is not set
    CONFIG_COMMON_CLKDEV=y
    
    #
    # Bus support
    #
    CONFIG_PCI=y
    CONFIG_PCI_SYSCALL=y
    CONFIG_ARCH_SUPPORTS_MSI=y
    CONFIG_PCI_MSI=y
    # CONFIG_PCI_DEBUG is not set
    # CONFIG_PCI_STUB is not set
    # CONFIG_PCI_IOV is not set
    # CONFIG_PCCARD is not set
    
    #
    # Kernel Features
    #
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ=y
    CONFIG_HIGH_RES_TIMERS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_VMSPLIT_3G=y
    # CONFIG_VMSPLIT_2G is not set
    # CONFIG_VMSPLIT_1G is not set
    CONFIG_PAGE_OFFSET=0xC0000000
    CONFIG_PREEMPT_NONE=y
    # CONFIG_PREEMPT_VOLUNTARY is not set
    # CONFIG_PREEMPT is not set
    CONFIG_HZ=100
    # CONFIG_THUMB2_KERNEL is not set
    CONFIG_AEABI=y
    CONFIG_OABI_COMPAT=y
    CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
    # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
    # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
    CONFIG_HIGHMEM=y
    # CONFIG_HIGHPTE is not set
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_HAVE_MEMBLOCK=y
    CONFIG_PAGEFLAGS_EXTENDED=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    # CONFIG_PHYS_ADDR_T_64BIT is not set
    CONFIG_ZONE_DMA_FLAG=0
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    # CONFIG_KSM is not set
    CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
    CONFIG_NEED_PER_CPU_KM=y
    CONFIG_FORCE_MAX_ZONEORDER=11
    # CONFIG_LEDS is not set
    CONFIG_ALIGNMENT_TRAP=y
    # CONFIG_UACCESS_WITH_MEMCPY is not set
    # CONFIG_SECCOMP is not set
    # CONFIG_CC_STACKPROTECTOR is not set
    # CONFIG_DEPRECATED_PARAM_STRUCT is not set
    
    #
    # Boot options
    #
    CONFIG_ZBOOT_ROM_TEXT=0
    CONFIG_ZBOOT_ROM_BSS=0
    CONFIG_CMDLINE=""
    # CONFIG_XIP_KERNEL is not set
    # CONFIG_KEXEC is not set
    CONFIG_AUTO_ZRELADDR=y
    
    #
    # CPU Power Management
    #
    # CONFIG_CPU_FREQ is not set
    # CONFIG_CPU_IDLE is not set
    
    #
    # Floating point emulation
    #
    
    #
    # At least one emulation must be selected
    #
    CONFIG_FPE_NWFPE=y
    # CONFIG_FPE_NWFPE_XP is not set
    # CONFIG_FPE_FASTFPE is not set
    CONFIG_VFP=y
    CONFIG_VFPv3=y
    CONFIG_NEON=y
    
    #
    # Userspace binary formats
    #
    CONFIG_BINFMT_ELF=y
    # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
    CONFIG_HAVE_AOUT=y
    # CONFIG_BINFMT_AOUT is not set
    CONFIG_BINFMT_MISC=y
    
    #
    # Power management options
    #
    CONFIG_PM=y
    CONFIG_PM_DEBUG=y
    # CONFIG_PM_ADVANCED_DEBUG is not set
    CONFIG_PM_VERBOSE=y
    # CONFIG_SUSPEND is not set
    # CONFIG_APM_EMULATION is not set
    CONFIG_PM_RUNTIME=y
    CONFIG_PM_OPS=y
    # CONFIG_ARCH_HAS_OPP is not set
    CONFIG_ARCH_SUSPEND_POSSIBLE=y
    CONFIG_NET=y
    
    #
    # Networking options
    #
    CONFIG_PACKET=y
    CONFIG_UNIX=y
    CONFIG_XFRM=y
    # CONFIG_XFRM_USER is not set
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_XFRM_MIGRATE is not set
    # CONFIG_XFRM_STATISTICS is not set
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    CONFIG_IP_FIB_HASH=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    CONFIG_IP_PNP_BOOTP=y
    CONFIG_IP_PNP_RARP=y
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE_DEMUX is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_XFRM_TUNNEL is not set
    CONFIG_INET_TUNNEL=m
    CONFIG_INET_XFRM_MODE_TRANSPORT=y
    CONFIG_INET_XFRM_MODE_TUNNEL=y
    CONFIG_INET_XFRM_MODE_BEET=y
    CONFIG_INET_LRO=y
    CONFIG_INET_DIAG=y
    CONFIG_INET_TCP_DIAG=y
    # CONFIG_TCP_CONG_ADVANCED is not set
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_DEFAULT_TCP_CONG="cubic"
    # CONFIG_TCP_MD5SIG is not set
    CONFIG_IPV6=m
    # CONFIG_IPV6_PRIVACY is not set
    # CONFIG_IPV6_ROUTER_PREF is not set
    # CONFIG_IPV6_OPTIMISTIC_DAD is not set
    # CONFIG_INET6_AH is not set
    # CONFIG_INET6_ESP is not set
    # CONFIG_INET6_IPCOMP is not set
    # CONFIG_IPV6_MIP6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    CONFIG_INET6_XFRM_MODE_TRANSPORT=m
    CONFIG_INET6_XFRM_MODE_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_BEET=m
    # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
    CONFIG_IPV6_SIT=m
    # CONFIG_IPV6_SIT_6RD is not set
    CONFIG_IPV6_NDISC_NODETYPE=y
    # CONFIG_IPV6_TUNNEL is not set
    # CONFIG_IPV6_MULTIPLE_TABLES is not set
    # CONFIG_IPV6_MROUTE is not set
    # CONFIG_NETLABEL is not set
    # CONFIG_NETWORK_SECMARK is not set
    # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
    # CONFIG_NETFILTER is not set
    # CONFIG_IP_DCCP is not set
    # CONFIG_IP_SCTP is not set
    # CONFIG_RDS is not set
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_L2TP is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_NET_DSA is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # CONFIG_PHONET is not set
    # CONFIG_IEEE802154 is not set
    # CONFIG_NET_SCHED is not set
    # CONFIG_DCB is not set
    # CONFIG_DNS_RESOLVER is not set
    
    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NET_TCPPROBE is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_CAN is not set
    # CONFIG_IRDA is not set
    # CONFIG_BT is not set
    # CONFIG_AF_RXRPC is not set
    CONFIG_WIRELESS=y
    # CONFIG_CFG80211 is not set
    # CONFIG_LIB80211 is not set
    
    #
    # CFG80211 needs to be enabled for MAC80211
    #
    
    #
    # Some wireless drivers require a rate control algorithm
    #
    # CONFIG_WIMAX is not set
    # CONFIG_RFKILL is not set
    # CONFIG_NET_9P is not set
    # CONFIG_CAIF is not set
    # CONFIG_CEPH_LIB is not set
    
    #
    # Device Drivers
    #
    
    #
    # Generic Driver Options
    #
    CONFIG_UEVENT_HELPER_PATH=""
    CONFIG_DEVTMPFS=y
    CONFIG_DEVTMPFS_MOUNT=y
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    CONFIG_FIRMWARE_IN_KERNEL=y
    CONFIG_EXTRA_FIRMWARE=""
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    # CONFIG_SYS_HYPERVISOR is not set
    # CONFIG_CONNECTOR is not set
    CONFIG_MTD=y
    # CONFIG_MTD_DEBUG is not set
    # CONFIG_MTD_TESTS is not set
    CONFIG_MTD_CONCAT=y
    CONFIG_MTD_PARTITIONS=y
    # CONFIG_MTD_REDBOOT_PARTS is not set
    CONFIG_MTD_CMDLINE_PARTS=y
    # CONFIG_MTD_AFS_PARTS is not set
    # CONFIG_MTD_AR7_PARTS is not set
    
    #
    # User Modules And Translation Layers
    #
    CONFIG_MTD_CHAR=y
    CONFIG_MTD_BLKDEVS=y
    CONFIG_MTD_BLOCK=y
    # CONFIG_FTL is not set
    # CONFIG_NFTL is not set
    # CONFIG_INFTL is not set
    # CONFIG_RFD_FTL is not set
    # CONFIG_SSFDC is not set
    # CONFIG_SM_FTL is not set
    # CONFIG_MTD_OOPS is not set
    
    #
    # RAM/ROM/Flash chip drivers
    #
    # CONFIG_MTD_CFI is not set
    # CONFIG_MTD_JEDECPROBE is not set
    CONFIG_MTD_MAP_BANK_WIDTH_1=y
    CONFIG_MTD_MAP_BANK_WIDTH_2=y
    CONFIG_MTD_MAP_BANK_WIDTH_4=y
    # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
    CONFIG_MTD_CFI_I1=y
    CONFIG_MTD_CFI_I2=y
    # CONFIG_MTD_CFI_I4 is not set
    # CONFIG_MTD_CFI_I8 is not set
    # CONFIG_MTD_RAM is not set
    # CONFIG_MTD_ROM is not set
    # CONFIG_MTD_ABSENT is not set
    
    #
    # Mapping drivers for chip access
    #
    # CONFIG_MTD_COMPLEX_MAPPINGS is not set
    # CONFIG_MTD_INTEL_VR_NOR is not set
    # CONFIG_MTD_PLATRAM is not set
    
    #
    # Self-contained MTD device drivers
    #
    # CONFIG_MTD_PMC551 is not set
    # CONFIG_MTD_DATAFLASH is not set
    CONFIG_MTD_M25P80=y
    CONFIG_M25PXX_USE_FAST_READ=y
    # CONFIG_MTD_SST25L is not set
    # CONFIG_MTD_SLRAM is not set
    # CONFIG_MTD_PHRAM is not set
    # CONFIG_MTD_MTDRAM is not set
    # CONFIG_MTD_BLOCK2MTD is not set
    
    #
    # Disk-On-Chip Device Drivers
    #
    # CONFIG_MTD_DOC2000 is not set
    # CONFIG_MTD_DOC2001 is not set
    # CONFIG_MTD_DOC2001PLUS is not set
    CONFIG_MTD_NAND_ECC=y
    # CONFIG_MTD_NAND_ECC_SMC is not set
    CONFIG_MTD_NAND=y
    # CONFIG_MTD_NAND_VERIFY_WRITE is not set
    # CONFIG_MTD_SM_COMMON is not set
    # CONFIG_MTD_NAND_MUSEUM_IDS is not set
    # CONFIG_MTD_NAND_DENALI is not set
    # CONFIG_MTD_NAND_GPIO is not set
    CONFIG_MTD_NAND_OMAP2=y
    CONFIG_MTD_NAND_IDS=y
    # CONFIG_MTD_NAND_RICOH is not set
    # CONFIG_MTD_NAND_DISKONCHIP is not set
    # CONFIG_MTD_NAND_CAFE is not set
    # CONFIG_MTD_NAND_NANDSIM is not set
    # CONFIG_MTD_NAND_PLATFORM is not set
    # CONFIG_MTD_ALAUDA is not set
    # CONFIG_MTD_ONENAND is not set
    
    #
    # LPDDR flash memory drivers
    #
    # CONFIG_MTD_LPDDR is not set
    CONFIG_MTD_UBI=y
    CONFIG_MTD_UBI_WL_THRESHOLD=4096
    CONFIG_MTD_UBI_BEB_RESERVE=1
    # CONFIG_MTD_UBI_GLUEBI is not set
    # CONFIG_MTD_UBI_DEBUG is not set
    # CONFIG_PARPORT is not set
    CONFIG_BLK_DEV=y
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    
    #
    # DRBD disabled because PROC_FS, INET or CONNECTOR not selected
    #
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=32768
    # CONFIG_BLK_DEV_XIP is not set
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set
    # CONFIG_MG_DISK is not set
    # CONFIG_BLK_DEV_RBD is not set
    CONFIG_MISC_DEVICES=y
    # CONFIG_AD525X_DPOT is not set
    # CONFIG_PHANTOM is not set
    # CONFIG_SGI_IOC4 is not set
    # CONFIG_TIFM_CORE is not set
    # CONFIG_ICS932S401 is not set
    # CONFIG_ENCLOSURE_SERVICES is not set
    # CONFIG_HP_ILO is not set
    # CONFIG_APDS9802ALS is not set
    # CONFIG_ISL29003 is not set
    # CONFIG_ISL29020 is not set
    # CONFIG_SENSORS_TSL2550 is not set
    # CONFIG_SENSORS_BH1780 is not set
    # CONFIG_SENSORS_BH1770 is not set
    # CONFIG_SENSORS_APDS990X is not set
    # CONFIG_HMC6352 is not set
    # CONFIG_DS1682 is not set
    # CONFIG_TI_DAC7512 is not set
    # CONFIG_BMP085 is not set
    # CONFIG_PCH_PHUB is not set
    CONFIG_DM8168_DVR_IO=y
    # CONFIG_C2PORT is not set
    
    #
    # EEPROM support
    #
    # CONFIG_EEPROM_AT24 is not set
    # CONFIG_EEPROM_AT25 is not set
    # CONFIG_EEPROM_LEGACY is not set
    # CONFIG_EEPROM_MAX6875 is not set
    # CONFIG_EEPROM_93CX6 is not set
    CONFIG_EEPROM_3WIRED_AT93C66=y
    # CONFIG_CB710_CORE is not set
    # CONFIG_IWMC3200TOP is not set
    
    #
    # Texas Instruments shared transport line discipline
    #
    CONFIG_HAVE_IDE=y
    # CONFIG_IDE is not set
    
    #
    # SCSI device support
    #
    CONFIG_SCSI_MOD=y
    # CONFIG_RAID_ATTRS is not set
    CONFIG_SCSI=y
    CONFIG_SCSI_DMA=y
    # CONFIG_SCSI_TGT is not set
    # CONFIG_SCSI_NETLINK is not set
    CONFIG_SCSI_PROC_FS=y
    
    #
    # SCSI support type (disk, tape, CD-ROM)
    #
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=y
    # CONFIG_CHR_DEV_SCH is not set
    # CONFIG_SCSI_MULTI_LUN is not set
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set
    # CONFIG_SCSI_SCAN_ASYNC is not set
    CONFIG_SCSI_WAIT_SCAN=m
    
    #
    # SCSI Transports
    #
    # CONFIG_SCSI_SPI_ATTRS is not set
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # CONFIG_SCSI_SAS_ATTRS is not set
    # CONFIG_SCSI_SAS_LIBSAS is not set
    # CONFIG_SCSI_SRP_ATTRS is not set
    # CONFIG_SCSI_LOWLEVEL is not set
    # CONFIG_SCSI_DH is not set
    # CONFIG_SCSI_OSD_INITIATOR is not set
    CONFIG_ATA=y
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_VERBOSE_ERROR=y
    CONFIG_SATA_PMP=y
    
    #
    # Controllers with non-SFF native interface
    #
    CONFIG_SATA_AHCI=y
    CONFIG_SATA_AHCI_PLATFORM=y
    # CONFIG_SATA_INIC162X is not set
    # CONFIG_SATA_SIL24 is not set
    # CONFIG_ATA_SFF is not set
    # CONFIG_MD is not set
    # CONFIG_FUSION is not set
    
    #
    # IEEE 1394 (FireWire) support
    #
    # CONFIG_FIREWIRE is not set
    # CONFIG_FIREWIRE_NOSY is not set
    # CONFIG_I2O is not set
    CONFIG_NETDEVICES=y
    # CONFIG_DUMMY is not set
    # CONFIG_BONDING is not set
    # CONFIG_MACVLAN is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_VETH is not set
    # CONFIG_ARCNET is not set
    CONFIG_MII=y
    CONFIG_PHYLIB=y
    
    #
    # MII PHY device drivers
    #
    # CONFIG_MARVELL_PHY is not set
    # CONFIG_DAVICOM_PHY is not set
    # CONFIG_QSEMI_PHY is not set
    # CONFIG_LXT_PHY is not set
    # CONFIG_CICADA_PHY is not set
    # CONFIG_VITESSE_PHY is not set
    # CONFIG_SMSC_PHY is not set
    # CONFIG_BROADCOM_PHY is not set
    # CONFIG_BCM63XX_PHY is not set
    # CONFIG_ICPLUS_PHY is not set
    # CONFIG_REALTEK_PHY is not set
    # CONFIG_NATIONAL_PHY is not set
    # CONFIG_STE10XP is not set
    # CONFIG_LSI_ET1011C_PHY is not set
    # CONFIG_MICREL_PHY is not set
    # CONFIG_FIXED_PHY is not set
    # CONFIG_MDIO_BITBANG is not set
    # CONFIG_NET_ETHERNET is not set
    CONFIG_NETDEV_1000=y
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    CONFIG_TI_DAVINCI_EMAC=y
    CONFIG_TI_DAVINCI_MDIO=y
    CONFIG_TI_DAVINCI_CPDMA=y
    # CONFIG_E1000 is not set
    # CONFIG_E1000E is not set
    # CONFIG_IP1000 is not set
    # CONFIG_IGB is not set
    # CONFIG_IGBVF is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    # CONFIG_SKGE is not set
    # CONFIG_SKY2 is not set
    # CONFIG_VIA_VELOCITY is not set
    # CONFIG_TIGON3 is not set
    # CONFIG_BNX2 is not set
    # CONFIG_CNIC is not set
    # CONFIG_QLA3XXX is not set
    # CONFIG_ATL1 is not set
    # CONFIG_ATL1E is not set
    # CONFIG_ATL1C is not set
    # CONFIG_JME is not set
    # CONFIG_STMMAC_ETH is not set
    # CONFIG_PCH_GBE is not set
    # CONFIG_NETDEV_10000 is not set
    # CONFIG_TR is not set
    # CONFIG_WLAN is not set
    
    #
    # Enable WiMAX (Networking options) to see the WiMAX drivers
    #
    
    #
    # USB Network Adapters
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    CONFIG_USB_USBNET=y
    # CONFIG_USB_NET_AX8817X is not set
    CONFIG_USB_NET_CDCETHER=y
    # CONFIG_USB_NET_CDC_EEM is not set
    CONFIG_USB_NET_DM9601=y
    # CONFIG_USB_NET_SMSC75XX is not set
    # CONFIG_USB_NET_SMSC95XX is not set
    # CONFIG_USB_NET_GL620A is not set
    # CONFIG_USB_NET_NET1080 is not set
    # CONFIG_USB_NET_PLUSB is not set
    # CONFIG_USB_NET_MCS7830 is not set
    # CONFIG_USB_NET_RNDIS_HOST is not set
    # CONFIG_USB_NET_CDC_SUBSET is not set
    # CONFIG_USB_NET_ZAURUS is not set
    # CONFIG_USB_NET_CX82310_ETH is not set
    # CONFIG_USB_NET_INT51X1 is not set
    # CONFIG_USB_IPHETH is not set
    # CONFIG_USB_SIERRA_NET is not set
    # CONFIG_WAN is not set
    
    #
    # CAIF transport drivers
    #
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_NETCONSOLE is not set
    # CONFIG_NETPOLL is not set
    # CONFIG_NET_POLL_CONTROLLER is not set
    # CONFIG_VMXNET3 is not set
    # CONFIG_ISDN is not set
    # CONFIG_PHONE is not set
    
    #
    # Input device support
    #
    CONFIG_INPUT=y
    # CONFIG_INPUT_FF_MEMLESS is not set
    # CONFIG_INPUT_POLLDEV is not set
    # CONFIG_INPUT_SPARSEKMAP is not set
    
    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set
    
    #
    # Input Device Drivers
    #
    # CONFIG_INPUT_KEYBOARD is not set
    # CONFIG_INPUT_MOUSE is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TABLET is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set
    
    #
    # Hardware I/O ports
    #
    CONFIG_SERIO=y
    CONFIG_SERIO_SERPORT=y
    # CONFIG_SERIO_PCIPS2 is not set
    # CONFIG_SERIO_RAW is not set
    # CONFIG_SERIO_ALTERA_PS2 is not set
    # CONFIG_SERIO_PS2MULT is not set
    # CONFIG_GAMEPORT is not set
    
    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_CONSOLE_TRANSLATIONS=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_VT_HW_CONSOLE_BINDING is not set
    CONFIG_DEVKMEM=y
    CONFIG_SERIAL_NONSTANDARD=y
    # CONFIG_COMPUTONE is not set
    # CONFIG_ROCKETPORT is not set
    # CONFIG_CYCLADES is not set
    # CONFIG_DIGIEPCA is not set
    # CONFIG_MOXA_INTELLIO is not set
    # CONFIG_MOXA_SMARTIO is not set
    # CONFIG_ISI is not set
    # CONFIG_SYNCLINKMP is not set
    # CONFIG_SYNCLINK_GT is not set
    # CONFIG_N_HDLC is not set
    # CONFIG_N_GSM is not set
    # CONFIG_RISCOM8 is not set
    # CONFIG_SPECIALIX is not set
    # CONFIG_STALDRV is not set
    # CONFIG_NOZOMI is not set
    
    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_PCI=y
    CONFIG_SERIAL_8250_NR_UARTS=64
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    CONFIG_SERIAL_8250_EXTENDED=y
    # CONFIG_SERIAL_8250_MANY_PORTS is not set
    CONFIG_SERIAL_8250_SHARE_IRQ=y
    CONFIG_SERIAL_8250_DETECT_IRQ=y
    CONFIG_SERIAL_8250_RSA=y
    
    #
    # Non-8250 serial port support
    #
    # CONFIG_SERIAL_MAX3100 is not set
    # CONFIG_SERIAL_MAX3107 is not set
    # CONFIG_SERIAL_MFD_HSU is not set
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    # CONFIG_SERIAL_JSM is not set
    CONFIG_SERIAL_OMAP=y
    CONFIG_SERIAL_OMAP_CONSOLE=y
    # CONFIG_SERIAL_TIMBERDALE is not set
    # CONFIG_SERIAL_ALTERA_JTAGUART is not set
    # CONFIG_SERIAL_ALTERA_UART is not set
    CONFIG_UNIX98_PTYS=y
    # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
    # CONFIG_LEGACY_PTYS is not set
    # CONFIG_IPMI_HANDLER is not set
    # CONFIG_HW_RANDOM is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_TCG_TPM is not set
    CONFIG_DEVPORT=y
    # CONFIG_TI81XX_PCIE_BOOTDRV is not set
    # CONFIG_RAMOOPS is not set
    CONFIG_I2C=y
    CONFIG_I2C_BOARDINFO=y
    CONFIG_I2C_COMPAT=y
    CONFIG_I2C_CHARDEV=y
    # CONFIG_I2C_MUX is not set
    CONFIG_I2C_HELPER_AUTO=y
    
    #
    # I2C Hardware Bus support
    #
    
    #
    # PC SMBus host controller drivers
    #
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    # CONFIG_I2C_I801 is not set
    # CONFIG_I2C_ISCH is not set
    # CONFIG_I2C_PIIX4 is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    
    #
    # I2C system bus drivers (mostly embedded / system-on-chip)
    #
    # CONFIG_I2C_DESIGNWARE is not set
    # CONFIG_I2C_GPIO is not set
    # CONFIG_I2C_INTEL_MID is not set
    # CONFIG_I2C_OCORES is not set
    CONFIG_I2C_OMAP=y
    # CONFIG_I2C_PCA_PLATFORM is not set
    # CONFIG_I2C_SIMTEC is not set
    # CONFIG_I2C_XILINX is not set
    
    #
    # External I2C/SMBus adapter drivers
    #
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_TAOS_EVM is not set
    # CONFIG_I2C_TINY_USB is not set
    
    #
    # Other I2C/SMBus bus drivers
    #
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    CONFIG_SPI=y
    CONFIG_SPI_DEBUG=y
    CONFIG_SPI_MASTER=y
    
    #
    # SPI Master Controller Drivers
    #
    # CONFIG_SPI_BITBANG is not set
    # CONFIG_SPI_GPIO is not set
    CONFIG_SPI_OMAP24XX=y
    # CONFIG_SPI_TOPCLIFF_PCH is not set
    # CONFIG_SPI_XILINX is not set
    # CONFIG_SPI_DESIGNWARE is not set
    
    #
    # SPI Protocol Masters
    #
    CONFIG_SPI_SPIDEV=y
    # CONFIG_SPI_TLE62X0 is not set
    
    #
    # PPS support
    #
    # CONFIG_PPS is not set
    
    #
    # PTP clock support
    #
    
    #
    # Enable Device Drivers -> PPS to see the PTP clock options.
    #
    CONFIG_ARCH_REQUIRE_GPIOLIB=y
    CONFIG_GPIOLIB=y
    # CONFIG_DEBUG_GPIO is not set
    # CONFIG_GPIO_SYSFS is not set
    
    #
    # Memory mapped GPIO expanders:
    #
    # CONFIG_GPIO_BASIC_MMIO is not set
    # CONFIG_GPIO_IT8761E is not set
    # CONFIG_GPIO_SCH is not set
    # CONFIG_GPIO_VX855 is not set
    
    #
    # I2C GPIO expanders:
    #
    # CONFIG_GPIO_MAX7300 is not set
    # CONFIG_GPIO_MAX732X is not set
    # CONFIG_GPIO_PCA953X is not set
    # CONFIG_GPIO_PCF857X is not set
    # CONFIG_GPIO_SX150X is not set
    # CONFIG_GPIO_ADP5588 is not set
    
    #
    # PCI GPIO expanders:
    #
    # CONFIG_GPIO_CS5535 is not set
    # CONFIG_GPIO_BT8XX is not set
    # CONFIG_GPIO_LANGWELL is not set
    # CONFIG_GPIO_PCH is not set
    # CONFIG_GPIO_RDC321X is not set
    
    #
    # SPI GPIO expanders:
    #
    # CONFIG_GPIO_MAX7301 is not set
    # CONFIG_GPIO_MCP23S08 is not set
    # CONFIG_GPIO_MC33880 is not set
    # CONFIG_GPIO_74X164 is not set
    
    #
    # AC97 GPIO expanders:
    #
    
    #
    # MODULbus GPIO expanders:
    #
    # CONFIG_W1 is not set
    # CONFIG_POWER_SUPPLY is not set
    # CONFIG_HWMON is not set
    # CONFIG_THERMAL is not set
    CONFIG_WATCHDOG=y
    # CONFIG_WATCHDOG_NOWAYOUT is not set
    
    #
    # Watchdog Device Drivers
    #
    # CONFIG_SOFT_WATCHDOG is not set
    CONFIG_OMAP_WATCHDOG=y
    # CONFIG_MAX63XX_WATCHDOG is not set
    # CONFIG_ALIM7101_WDT is not set
    
    #
    # PCI-based Watchdog Cards
    #
    # CONFIG_PCIPCWATCHDOG is not set
    # CONFIG_WDTPCI is not set
    
    #
    # USB-based Watchdog Cards
    #
    # CONFIG_USBPCWATCHDOG is not set
    CONFIG_SSB_POSSIBLE=y
    
    #
    # Sonics Silicon Backplane
    #
    CONFIG_SSB=m
    CONFIG_SSB_SPROM=y
    CONFIG_SSB_PCIHOST_POSSIBLE=y
    CONFIG_SSB_PCIHOST=y
    # CONFIG_SSB_B43_PCI_BRIDGE is not set
    CONFIG_SSB_SDIOHOST_POSSIBLE=y
    # CONFIG_SSB_SDIOHOST is not set
    # CONFIG_SSB_DEBUG is not set
    CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
    # CONFIG_SSB_DRIVER_PCICORE is not set
    CONFIG_MFD_SUPPORT=y
    # CONFIG_MFD_CORE is not set
    # CONFIG_MFD_88PM860X is not set
    # CONFIG_MFD_SM501 is not set
    # CONFIG_MFD_ASIC3 is not set
    # CONFIG_HTC_EGPIO is not set
    # CONFIG_HTC_PASIC3 is not set
    # CONFIG_HTC_I2CPLD is not set
    # CONFIG_TPS65010 is not set
    # CONFIG_TPS6507X is not set
    # CONFIG_MFD_STMPE is not set
    # CONFIG_MFD_TC35892 is not set
    # CONFIG_MFD_TMIO is not set
    # CONFIG_MFD_T7L66XB is not set
    # CONFIG_MFD_TC6387XB is not set
    # CONFIG_MFD_TC6393XB is not set
    # CONFIG_PMIC_DA903X is not set
    # CONFIG_PMIC_ADP5520 is not set
    # CONFIG_MFD_MAX8925 is not set
    # CONFIG_MFD_MAX8998 is not set
    # CONFIG_MFD_WM8400 is not set
    # CONFIG_MFD_WM831X_I2C is not set
    # CONFIG_MFD_WM831X_SPI is not set
    # CONFIG_MFD_WM8350_I2C is not set
    # CONFIG_MFD_WM8994 is not set
    # CONFIG_MFD_PCF50633 is not set
    # CONFIG_MFD_MC13XXX is not set
    # CONFIG_ABX500_CORE is not set
    # CONFIG_EZX_PCAP is not set
    # CONFIG_MFD_TIMBERDALE is not set
    # CONFIG_LPC_SCH is not set
    # CONFIG_MFD_RDC321X is not set
    # CONFIG_MFD_JANZ_CMODIO is not set
    # CONFIG_MFD_TPS6586X is not set
    # CONFIG_MFD_VX855 is not set
    # CONFIG_MFD_TPS65910 is not set
    CONFIG_REGULATOR=y
    # CONFIG_REGULATOR_DEBUG is not set
    # CONFIG_REGULATOR_DUMMY is not set
    # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
    # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
    # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
    # CONFIG_REGULATOR_BQ24022 is not set
    # CONFIG_REGULATOR_MAX1586 is not set
    # CONFIG_REGULATOR_MAX8649 is not set
    # CONFIG_REGULATOR_MAX8660 is not set
    # CONFIG_REGULATOR_MAX8952 is not set
    # CONFIG_REGULATOR_LP3971 is not set
    # CONFIG_REGULATOR_LP3972 is not set
    # CONFIG_REGULATOR_TPS65023 is not set
    CONFIG_REGULATOR_TPS40400=y
    CONFIG_REGULATOR_GPIO=y
    # CONFIG_REGULATOR_TPS6507X is not set
    # CONFIG_REGULATOR_ISL6271A is not set
    # CONFIG_REGULATOR_AD5398 is not set
    CONFIG_MEDIA_SUPPORT=y
    
    #
    # Multimedia core support
    #
    # CONFIG_MEDIA_CONTROLLER is not set
    CONFIG_VIDEO_DEV=y
    CONFIG_VIDEO_V4L2_COMMON=y
    CONFIG_VIDEO_ALLOW_V4L1=y
    CONFIG_VIDEO_V4L1_COMPAT=y
    # CONFIG_DVB_CORE is not set
    CONFIG_VIDEO_MEDIA=y
    
    #
    # Multimedia drivers
    #
    # CONFIG_IR_CORE is not set
    # CONFIG_MEDIA_ATTACH is not set
    CONFIG_MEDIA_TUNER=y
    # CONFIG_MEDIA_TUNER_CUSTOMISE is not set
    CONFIG_MEDIA_TUNER_SIMPLE=y
    CONFIG_MEDIA_TUNER_TDA8290=y
    CONFIG_MEDIA_TUNER_TDA827X=y
    CONFIG_MEDIA_TUNER_TDA18271=y
    CONFIG_MEDIA_TUNER_TDA9887=y
    CONFIG_MEDIA_TUNER_TEA5761=y
    CONFIG_MEDIA_TUNER_TEA5767=y
    CONFIG_MEDIA_TUNER_MT20XX=y
    CONFIG_MEDIA_TUNER_XC2028=y
    CONFIG_MEDIA_TUNER_XC5000=y
    CONFIG_MEDIA_TUNER_MC44S803=y
    CONFIG_VIDEO_V4L2=y
    CONFIG_VIDEO_V4L1=y
    CONFIG_VIDEOBUF_GEN=y
    CONFIG_VIDEOBUF_DMA_SG=y
    CONFIG_VIDEOBUF_DMA_CONTIG=y
    CONFIG_VIDEO_CAPTURE_DRIVERS=y
    # CONFIG_VIDEO_ADV_DEBUG is not set
    # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
    # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
    
    #
    # Encoders/decoders and other helper chips
    #
    
    #
    # Audio decoders
    #
    # CONFIG_VIDEO_TVAUDIO is not set
    # CONFIG_VIDEO_TDA7432 is not set
    # CONFIG_VIDEO_TDA9840 is not set
    # CONFIG_VIDEO_TDA9875 is not set
    # CONFIG_VIDEO_TEA6415C is not set
    # CONFIG_VIDEO_TEA6420 is not set
    # CONFIG_VIDEO_MSP3400 is not set
    # CONFIG_VIDEO_CS5345 is not set
    # CONFIG_VIDEO_CS53L32A is not set
    # CONFIG_VIDEO_M52790 is not set
    # CONFIG_VIDEO_TLV320AIC23B is not set
    # CONFIG_VIDEO_WM8775 is not set
    # CONFIG_VIDEO_WM8739 is not set
    # CONFIG_VIDEO_VP27SMPX is not set
    
    #
    # RDS decoders
    #
    # CONFIG_VIDEO_SAA6588 is not set
    
    #
    # Video decoders
    #
    # CONFIG_VIDEO_ADV7180 is not set
    # CONFIG_VIDEO_BT819 is not set
    # CONFIG_VIDEO_BT856 is not set
    # CONFIG_VIDEO_BT866 is not set
    # CONFIG_VIDEO_KS0127 is not set
    # CONFIG_VIDEO_OV7670 is not set
    # CONFIG_VIDEO_MT9T001 is not set
    # CONFIG_VIDEO_MT9V011 is not set
    # CONFIG_VIDEO_MT9V113 is not set
    # CONFIG_VIDEO_MT9T111 is not set
    # CONFIG_VIDEO_TCM825X is not set
    # CONFIG_VIDEO_SAA7110 is not set
    # CONFIG_VIDEO_SAA711X is not set
    # CONFIG_VIDEO_SAA717X is not set
    # CONFIG_VIDEO_SAA7191 is not set
    # CONFIG_VIDEO_TVP514X is not set
    # CONFIG_VIDEO_TVP5150 is not set
    CONFIG_VIDEO_TVP5158=m
    CONFIG_VIDEO_TVP7002=m
    # CONFIG_VIDEO_VPX3220 is not set
    
    #
    # Video and audio decoders
    #
    # CONFIG_VIDEO_CX25840 is not set
    
    #
    # MPEG video encoders
    #
    # CONFIG_VIDEO_CX2341X is not set
    
    #
    # Video encoders
    #
    # CONFIG_VIDEO_SAA7127 is not set
    # CONFIG_VIDEO_SAA7185 is not set
    # CONFIG_VIDEO_ADV7170 is not set
    # CONFIG_VIDEO_ADV7175 is not set
    # CONFIG_VIDEO_THS7303 is not set
    # CONFIG_VIDEO_ADV7343 is not set
    # CONFIG_VIDEO_AK881X is not set
    
    #
    # Video improvement chips
    #
    # CONFIG_VIDEO_UPD64031A is not set
    # CONFIG_VIDEO_UPD64083 is not set
    CONFIG_VIDEO_TI81XX_VIDOUT=m
    CONFIG_VIDEO_TI81XX_VIDIN=m
    # CONFIG_VIDEO_CPIA2 is not set
    # CONFIG_VIDEO_SAA7134 is not set
    # CONFIG_VIDEO_MXB is not set
    # CONFIG_VIDEO_HEXIUM_ORION is not set
    # CONFIG_VIDEO_HEXIUM_GEMINI is not set
    # CONFIG_VIDEO_CAFE_CCIC is not set
    # CONFIG_VIDEO_SR030PC30 is not set
    # CONFIG_SOC_CAMERA is not set
    CONFIG_V4L_USB_DRIVERS=y
    CONFIG_USB_VIDEO_CLASS=y
    CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
    # CONFIG_USB_GSPCA is not set
    # CONFIG_VIDEO_PVRUSB2 is not set
    # CONFIG_VIDEO_HDPVR is not set
    # CONFIG_VIDEO_USBVISION is not set
    # CONFIG_USB_VICAM is not set
    # CONFIG_USB_IBMCAM is not set
    # CONFIG_USB_KONICAWC is not set
    # CONFIG_USB_ET61X251 is not set
    # CONFIG_USB_SE401 is not set
    # CONFIG_USB_SN9C102 is not set
    # CONFIG_USB_PWC is not set
    # CONFIG_USB_ZR364XX is not set
    # CONFIG_USB_STKWEBCAM is not set
    # CONFIG_USB_S2255 is not set
    # CONFIG_V4L_MEM2MEM_DRIVERS is not set
    # CONFIG_RADIO_ADAPTERS is not set
    # CONFIG_DAB is not set
    CONFIG_HAVE_TI_TILER=y
    # CONFIG_TI_TILER is not set
    
    #
    # Graphics support
    #
    CONFIG_VGA_ARB=y
    CONFIG_VGA_ARB_MAX_GPUS=16
    # CONFIG_DRM is not set
    # CONFIG_STUB_POULSBO is not set
    # CONFIG_VGASTATE is not set
    # CONFIG_VIDEO_OUTPUT_CONTROL is not set
    CONFIG_FB=y
    # CONFIG_FIRMWARE_EDID is not set
    # CONFIG_FB_DDC is not set
    # CONFIG_FB_BOOT_VESA_SUPPORT is not set
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
    # CONFIG_FB_SYS_FILLRECT is not set
    # CONFIG_FB_SYS_COPYAREA is not set
    # CONFIG_FB_SYS_IMAGEBLIT is not set
    # CONFIG_FB_FOREIGN_ENDIAN is not set
    # CONFIG_FB_SYS_FOPS is not set
    # CONFIG_FB_SVGALIB is not set
    # CONFIG_FB_MACMODES is not set
    # CONFIG_FB_BACKLIGHT is not set
    # CONFIG_FB_MODE_HELPERS is not set
    # CONFIG_FB_TILEBLITTING is not set
    
    #
    # Frame buffer hardware drivers
    #
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_S1D13XXX is not set
    # CONFIG_FB_NVIDIA is not set
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_S3 is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_VT8623 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_ARK is not set
    # CONFIG_FB_PM3 is not set
    # CONFIG_FB_CARMINE is not set
    # CONFIG_FB_VIRTUAL is not set
    # CONFIG_FB_METRONOME is not set
    # CONFIG_FB_MB862XX is not set
    # CONFIG_FB_BROADSHEET is not set
    CONFIG_TI81XX_VPSS=m
    CONFIG_TI81XX_VPSS_VRAM_SIZE=50
    CONFIG_TI81XX_VPSS_DEBUG_SUPPORT=y
    CONFIG_FB_TI81XX=m
    CONFIG_FB_TI81XX_DEBUG_SUPPORT=y
    CONFIG_FB_TI81XX_NUM_FBS=3
    CONFIG_TI81XX_HDMI=m
    CONFIG_SII9022a=m
    # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
    
    #
    # Display device support
    #
    # CONFIG_DISPLAY_SUPPORT is not set
    
    #
    # Console display driver support
    #
    CONFIG_DUMMY_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE is not set
    # CONFIG_LOGO is not set
    CONFIG_SOUND=y
    # CONFIG_SOUND_OSS_CORE is not set
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    CONFIG_SND_HWDEP=y
    CONFIG_SND_RAWMIDI=y
    CONFIG_SND_JACK=y
    # CONFIG_SND_SEQUENCER is not set
    # CONFIG_SND_MIXER_OSS is not set
    # CONFIG_SND_PCM_OSS is not set
    # CONFIG_SND_HRTIMER is not set
    # CONFIG_SND_DYNAMIC_MINORS is not set
    CONFIG_SND_SUPPORT_OLD_API=y
    CONFIG_SND_VERBOSE_PROCFS=y
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set
    # CONFIG_SND_RAWMIDI_SEQ is not set
    # CONFIG_SND_OPL3_LIB_SEQ is not set
    # CONFIG_SND_OPL4_LIB_SEQ is not set
    # CONFIG_SND_SBAWE_SEQ is not set
    # CONFIG_SND_EMU10K1_SEQ is not set
    # CONFIG_SND_DRIVERS is not set
    CONFIG_SND_PCI=y
    # CONFIG_SND_AD1889 is not set
    # CONFIG_SND_ALS300 is not set
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AW2 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_OXYGEN is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS5535AUDIO is not set
    # CONFIG_SND_CTXFI is not set
    # CONFIG_SND_DARLA20 is not set
    # CONFIG_SND_GINA20 is not set
    # CONFIG_SND_LAYLA20 is not set
    # CONFIG_SND_DARLA24 is not set
    # CONFIG_SND_GINA24 is not set
    # CONFIG_SND_LAYLA24 is not set
    # CONFIG_SND_MONA is not set
    # CONFIG_SND_MIA is not set
    # CONFIG_SND_ECHO3G is not set
    # CONFIG_SND_INDIGO is not set
    # CONFIG_SND_INDIGOIO is not set
    # CONFIG_SND_INDIGODJ is not set
    # CONFIG_SND_INDIGOIOX is not set
    # CONFIG_SND_INDIGODJX is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_HDA_INTEL is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_HDSPM is not set
    # CONFIG_SND_HIFIER is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_LX6464ES is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_PCXHR is not set
    # CONFIG_SND_RIPTIDE is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VIRTUOSO is not set
    # CONFIG_SND_VX222 is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ARM is not set
    # CONFIG_SND_SPI is not set
    CONFIG_SND_USB=y
    CONFIG_SND_USB_AUDIO=y
    # CONFIG_SND_USB_UA101 is not set
    # CONFIG_SND_USB_CAIAQ is not set
    CONFIG_SND_SOC=y
    CONFIG_SND_TI81XX_SOC=y
    CONFIG_SND_DAVINCI_SOC_MCASP=y
    CONFIG_SND_TI81XX_SOC_EVM=y
    # CONFIG_SND_SOC_TI81XX_HDMI is not set
    # CONFIG_SND_OMAP_SOC is not set
    CONFIG_SND_SOC_I2C_AND_SPI=y
    # CONFIG_SND_SOC_ALL_CODECS is not set
    CONFIG_SND_SOC_TLV320AIC3X=y
    # CONFIG_SOUND_PRIME is not set
    CONFIG_HID_SUPPORT=y
    CONFIG_HID=y
    # CONFIG_HIDRAW is not set
    
    #
    # USB Input Devices
    #
    CONFIG_USB_HID=y
    # CONFIG_HID_PID is not set
    # CONFIG_USB_HIDDEV is not set
    
    #
    # Special HID drivers
    #
    # CONFIG_HID_3M_PCT is not set
    CONFIG_HID_A4TECH=y
    # CONFIG_HID_ACRUX_FF is not set
    CONFIG_HID_APPLE=y
    CONFIG_HID_BELKIN=y
    # CONFIG_HID_CANDO is not set
    CONFIG_HID_CHERRY=y
    CONFIG_HID_CHICONY=y
    # CONFIG_HID_PRODIKEYS is not set
    CONFIG_HID_CYPRESS=y
    # CONFIG_HID_DRAGONRISE is not set
    # CONFIG_HID_EGALAX is not set
    CONFIG_HID_EZKEY=y
    CONFIG_HID_KYE=y
    # CONFIG_HID_UCLOGIC is not set
    # CONFIG_HID_WALTOP is not set
    # CONFIG_HID_GYRATION is not set
    # CONFIG_HID_TWINHAN is not set
    CONFIG_HID_KENSINGTON=y
    CONFIG_HID_LOGITECH=y
    # CONFIG_LOGITECH_FF is not set
    # CONFIG_LOGIRUMBLEPAD2_FF is not set
    # CONFIG_LOGIG940_FF is not set
    # CONFIG_LOGIWII_FF is not set
    CONFIG_HID_MICROSOFT=y
    # CONFIG_HID_MOSART is not set
    CONFIG_HID_MONTEREY=y
    # CONFIG_HID_NTRIG is not set
    # CONFIG_HID_ORTEK is not set
    # CONFIG_HID_PANTHERLORD is not set
    # CONFIG_HID_PETALYNX is not set
    # CONFIG_HID_PICOLCD is not set
    # CONFIG_HID_QUANTA is not set
    # CONFIG_HID_ROCCAT is not set
    # CONFIG_HID_ROCCAT_KONE is not set
    # CONFIG_HID_ROCCAT_PYRA is not set
    # CONFIG_HID_SAMSUNG is not set
    # CONFIG_HID_SONY is not set
    # CONFIG_HID_STANTUM is not set
    # CONFIG_HID_SUNPLUS is not set
    # CONFIG_HID_GREENASIA is not set
    # CONFIG_HID_SMARTJOYPLUS is not set
    # CONFIG_HID_TOPSEED is not set
    # CONFIG_HID_THRUSTMASTER is not set
    # CONFIG_HID_ZEROPLUS is not set
    # CONFIG_HID_ZYDACRON is not set
    CONFIG_USB_SUPPORT=y
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set
    CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
    
    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_DEVICE_CLASS=y
    # CONFIG_USB_DYNAMIC_MINORS is not set
    CONFIG_USB_SUSPEND=y
    # CONFIG_USB_OTG is not set
    # CONFIG_USB_MON is not set
    # CONFIG_USB_WUSB is not set
    # CONFIG_USB_WUSB_CBAF is not set
    
    #
    # USB Host Controller Drivers
    #
    # CONFIG_USB_C67X00_HCD is not set
    # CONFIG_USB_XHCI_HCD is not set
    # CONFIG_USB_EHCI_HCD is not set
    # CONFIG_USB_OXU210HP_HCD is not set
    # CONFIG_USB_ISP116X_HCD is not set
    # CONFIG_USB_ISP1760_HCD is not set
    # CONFIG_USB_ISP1362_HCD is not set
    # CONFIG_USB_OHCI_HCD is not set
    # CONFIG_USB_UHCI_HCD is not set
    # CONFIG_USB_SL811_HCD is not set
    # CONFIG_USB_R8A66597_HCD is not set
    # CONFIG_USB_WHCI_HCD is not set
    # CONFIG_USB_HWA_HCD is not set
    CONFIG_USB_MUSB_HDRC=y
    
    #
    # Platform Glue Layer
    #
    # CONFIG_USB_MUSB_TUSB6010_GLUE is not set
    # CONFIG_USB_MUSB_OMAP2PLUS_GLUE is not set
    # CONFIG_USB_MUSB_AM35X_GLUE is not set
    CONFIG_USB_MUSB_TI81XX_GLUE=y
    # CONFIG_USB_MUSB_DAVINCI is not set
    # CONFIG_USB_MUSB_DA8XX is not set
    # CONFIG_USB_MUSB_TUSB6010 is not set
    # CONFIG_USB_MUSB_OMAP2PLUS is not set
    # CONFIG_USB_MUSB_AM35X is not set
    CONFIG_USB_MUSB_TI81XX=y
    # CONFIG_USB_MUSB_BLACKFIN is not set
    # CONFIG_USB_MUSB_UX500 is not set
    CONFIG_USB_TI81XX_USBID_CTRL_SW=y
    # CONFIG_USB_TI81XX_USBID_CTRL_HW is not set
    CONFIG_USB_MUSB_HOST=y
    CONFIG_USB_MUSB_HDRC_HCD=y
    # CONFIG_MUSB_PIO_ONLY is not set
    # CONFIG_USB_INVENTRA_DMA_HW is not set
    # CONFIG_USB_TI_CPPI_DMA_HW is not set
    CONFIG_USB_TI_CPPI41_DMA_HW=y
    # CONFIG_USB_INVENTRA_DMA is not set
    # CONFIG_USB_TI_CPPI_DMA is not set
    CONFIG_USB_TI_CPPI41_DMA=y
    # CONFIG_USB_TUSB_OMAP_DMA is not set
    CONFIG_USB_MUSB_DEBUG=y
    
    #
    # USB Device Class drivers
    #
    # CONFIG_USB_ACM is not set
    # CONFIG_USB_PRINTER is not set
    # CONFIG_USB_WDM is not set
    # CONFIG_USB_TMC is not set
    
    #
    # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
    #
    
    #
    # also be needed; see USB_STORAGE Help for more info
    #
    CONFIG_USB_STORAGE=y
    # CONFIG_USB_STORAGE_DEBUG is not set
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_ISD200 is not set
    # CONFIG_USB_STORAGE_USBAT is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set
    # CONFIG_USB_STORAGE_ALAUDA is not set
    # CONFIG_USB_STORAGE_ONETOUCH is not set
    # CONFIG_USB_STORAGE_KARMA is not set
    # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
    # CONFIG_USB_UAS is not set
    # CONFIG_USB_LIBUSUAL is not set
    
    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    
    #
    # USB port drivers
    #
    # CONFIG_USB_SERIAL is not set
    
    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_ADUTUX is not set
    # CONFIG_USB_SEVSEG is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYPRESS_CY7C63 is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_FTDI_ELAN is not set
    # CONFIG_USB_APPLEDISPLAY is not set
    # CONFIG_USB_SISUSBVGA is not set
    # CONFIG_USB_LD is not set
    # CONFIG_USB_TRANCEVIBRATOR is not set
    # CONFIG_USB_IOWARRIOR is not set
    # CONFIG_USB_TEST is not set
    # CONFIG_USB_ISIGHTFW is not set
    # CONFIG_USB_YUREX is not set
    # CONFIG_USB_GADGET is not set
    
    #
    # OTG and related infrastructure
    #
    CONFIG_USB_OTG_UTILS=y
    # CONFIG_USB_GPIO_VBUS is not set
    # CONFIG_USB_ULPI is not set
    CONFIG_NOP_USB_XCEIV=y
    # CONFIG_UWB is not set
    CONFIG_MMC=y
    # CONFIG_MMC_DEBUG is not set
    # CONFIG_MMC_UNSAFE_RESUME is not set
    
    #
    # MMC/SD/SDIO Card Drivers
    #
    CONFIG_MMC_BLOCK=y
    CONFIG_MMC_BLOCK_MINORS=8
    CONFIG_MMC_BLOCK_BOUNCE=y
    # CONFIG_SDIO_UART is not set
    # CONFIG_MMC_TEST is not set
    
    #
    # MMC/SD/SDIO Host Controller Drivers
    #
    # CONFIG_MMC_SDHCI is not set
    # CONFIG_MMC_OMAP is not set
    CONFIG_MMC_OMAP_HS=y
    # CONFIG_MMC_TIFM_SD is not set
    # CONFIG_MMC_CB710 is not set
    # CONFIG_MMC_VIA_SDMMC is not set
    # CONFIG_MMC_USHC is not set
    # CONFIG_MEMSTICK is not set
    # CONFIG_NEW_LEDS is not set
    # CONFIG_ACCESSIBILITY is not set
    # CONFIG_INFINIBAND is not set
    CONFIG_RTC_LIB=y
    CONFIG_RTC_CLASS=y
    CONFIG_RTC_HCTOSYS=y
    CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
    # CONFIG_RTC_DEBUG is not set
    
    #
    # RTC interfaces
    #
    CONFIG_RTC_INTF_SYSFS=y
    CONFIG_RTC_INTF_PROC=y
    CONFIG_RTC_INTF_DEV=y
    # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
    # CONFIG_RTC_DRV_TEST is not set
    
    #
    # I2C RTC drivers
    #
    CONFIG_RTC_DRV_DS1307=y
    # CONFIG_RTC_DRV_DS1374 is not set
    # CONFIG_RTC_DRV_DS1672 is not set
    # CONFIG_RTC_DRV_DS3232 is not set
    # CONFIG_RTC_DRV_MAX6900 is not set
    # CONFIG_RTC_DRV_RS5C372 is not set
    # CONFIG_RTC_DRV_ISL1208 is not set
    # CONFIG_RTC_DRV_ISL12022 is not set
    # CONFIG_RTC_DRV_X1205 is not set
    # CONFIG_RTC_DRV_PCF8563 is not set
    # CONFIG_RTC_DRV_PCF8583 is not set
    # CONFIG_RTC_DRV_M41T80 is not set
    # CONFIG_RTC_DRV_BQ32K is not set
    # CONFIG_RTC_DRV_S35390A is not set
    # CONFIG_RTC_DRV_FM3130 is not set
    # CONFIG_RTC_DRV_RX8581 is not set
    # CONFIG_RTC_DRV_RX8025 is not set
    
    #
    # SPI RTC drivers
    #
    # CONFIG_RTC_DRV_M41T94 is not set
    # CONFIG_RTC_DRV_DS1305 is not set
    # CONFIG_RTC_DRV_DS1390 is not set
    # CONFIG_RTC_DRV_MAX6902 is not set
    # CONFIG_RTC_DRV_R9701 is not set
    # CONFIG_RTC_DRV_RS5C348 is not set
    # CONFIG_RTC_DRV_DS3234 is not set
    # CONFIG_RTC_DRV_PCF2123 is not set
    
    #
    # Platform RTC drivers
    #
    # CONFIG_RTC_DRV_CMOS is not set
    # CONFIG_RTC_DRV_DS1286 is not set
    # CONFIG_RTC_DRV_DS1511 is not set
    # CONFIG_RTC_DRV_DS1553 is not set
    # CONFIG_RTC_DRV_DS1742 is not set
    # CONFIG_RTC_DRV_STK17TA8 is not set
    # CONFIG_RTC_DRV_M48T86 is not set
    # CONFIG_RTC_DRV_M48T35 is not set
    # CONFIG_RTC_DRV_M48T59 is not set
    # CONFIG_RTC_DRV_MSM6242 is not set
    # CONFIG_RTC_DRV_BQ4802 is not set
    # CONFIG_RTC_DRV_RP5C01 is not set
    # CONFIG_RTC_DRV_V3020 is not set
    
    #
    # on-CPU RTC drivers
    #
    CONFIG_RTC_DRV_OMAP=y
    # CONFIG_DMADEVICES is not set
    # CONFIG_AUXDISPLAY is not set
    # CONFIG_UIO is not set
    # CONFIG_STAGING is not set
    CONFIG_Sys_Link=y
    CONFIG_SYSLINK_MULTIPROC=y
    CONFIG_SYSLINK_NOTIFY=y
    
    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    CONFIG_EXT2_FS_SECURITY=y
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=y
    # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    CONFIG_EXT3_FS_SECURITY=y
    # CONFIG_EXT4_FS is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    # CONFIG_REISERFS_FS is not set
    # CONFIG_JFS_FS is not set
    CONFIG_FS_POSIX_ACL=y
    # CONFIG_XFS_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_BTRFS_FS is not set
    # CONFIG_NILFS2_FS is not set
    CONFIG_FILE_LOCKING=y
    # CONFIG_FSNOTIFY is not set
    # CONFIG_DNOTIFY is not set
    # CONFIG_INOTIFY_USER is not set
    # CONFIG_FANOTIFY is not set
    # CONFIG_QUOTA is not set
    # CONFIG_QUOTACTL is not set
    # CONFIG_AUTOFS4_FS is not set
    # CONFIG_FUSE_FS is not set
    
    #
    # Caches
    #
    # CONFIG_FSCACHE is not set
    
    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=y
    # CONFIG_JOLIET is not set
    # CONFIG_ZISOFS is not set
    # CONFIG_UDF_FS is not set
    
    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    # CONFIG_NTFS_FS is not set
    
    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_PROC_PAGE_MONITOR=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    # CONFIG_TMPFS_POSIX_ACL is not set
    # CONFIG_HUGETLB_PAGE is not set
    # CONFIG_CONFIGFS_FS is not set
    CONFIG_MISC_FILESYSTEMS=y
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_ECRYPT_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    CONFIG_JFFS2_FS=y
    CONFIG_JFFS2_FS_DEBUG=0
    CONFIG_JFFS2_FS_WRITEBUFFER=y
    CONFIG_JFFS2_FS_WBUF_VERIFY=y
    # CONFIG_JFFS2_SUMMARY is not set
    # CONFIG_JFFS2_FS_XATTR is not set
    # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
    CONFIG_JFFS2_ZLIB=y
    # CONFIG_JFFS2_LZO is not set
    CONFIG_JFFS2_RTIME=y
    # CONFIG_JFFS2_RUBIN is not set
    CONFIG_UBIFS_FS=y
    # CONFIG_UBIFS_FS_XATTR is not set
    # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
    CONFIG_UBIFS_FS_LZO=y
    CONFIG_UBIFS_FS_ZLIB=y
    # CONFIG_UBIFS_FS_DEBUG is not set
    # CONFIG_LOGFS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_SQUASHFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_OMFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_ROMFS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set
    CONFIG_NETWORK_FILESYSTEMS=y
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    # CONFIG_NFS_V3_ACL is not set
    # CONFIG_NFS_V4 is not set
    CONFIG_ROOT_NFS=y
    # CONFIG_NFSD is not set
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_NFS_COMMON=y
    CONFIG_SUNRPC=y
    # CONFIG_RPCSEC_GSS_KRB5 is not set
    # CONFIG_CEPH_FS is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    
    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="utf8"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ASCII=y
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    # CONFIG_NLS_ISO8859_15 is not set
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=y
    # CONFIG_DLM is not set
    
    #
    # Kernel hacking
    #
    # CONFIG_PRINTK_TIME is not set
    CONFIG_ENABLE_WARN_DEPRECATED=y
    CONFIG_ENABLE_MUST_CHECK=y
    CONFIG_FRAME_WARN=1024
    CONFIG_MAGIC_SYSRQ=y
    # CONFIG_STRIP_ASM_SYMS is not set
    # CONFIG_UNUSED_SYMBOLS is not set
    CONFIG_DEBUG_FS=y
    # CONFIG_HEADERS_CHECK is not set
    CONFIG_DEBUG_KERNEL=y
    # CONFIG_DEBUG_SHIRQ is not set
    # CONFIG_LOCKUP_DETECTOR is not set
    # CONFIG_HARDLOCKUP_DETECTOR is not set
    # CONFIG_DETECT_HUNG_TASK is not set
    # CONFIG_SCHED_DEBUG is not set
    # CONFIG_SCHEDSTATS is not set
    # CONFIG_TIMER_STATS is not set
    # CONFIG_DEBUG_OBJECTS is not set
    # CONFIG_SLUB_DEBUG_ON is not set
    # CONFIG_SLUB_STATS is not set
    # CONFIG_DEBUG_KMEMLEAK is not set
    # CONFIG_DEBUG_RT_MUTEXES is not set
    # CONFIG_RT_MUTEX_TESTER is not set
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_MUTEXES is not set
    CONFIG_BKL=y
    # CONFIG_DEBUG_LOCK_ALLOC is not set
    # CONFIG_PROVE_LOCKING is not set
    # CONFIG_SPARSE_RCU_POINTER is not set
    # CONFIG_LOCK_STAT is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
    # CONFIG_DEBUG_KOBJECT is not set
    # CONFIG_DEBUG_HIGHMEM is not set
    CONFIG_DEBUG_BUGVERBOSE=y
    # CONFIG_DEBUG_INFO is not set
    # CONFIG_DEBUG_VM is not set
    # CONFIG_DEBUG_WRITECOUNT is not set
    CONFIG_DEBUG_MEMORY_INIT=y
    # CONFIG_DEBUG_LIST is not set
    # CONFIG_TEST_LIST_SORT is not set
    # CONFIG_DEBUG_SG is not set
    # CONFIG_DEBUG_NOTIFIERS is not set
    # CONFIG_DEBUG_CREDENTIALS is not set
    CONFIG_FRAME_POINTER=y
    # CONFIG_BOOT_PRINTK_DELAY is not set
    # CONFIG_RCU_TORTURE_TEST is not set
    # CONFIG_KPROBES_SANITY_TEST is not set
    # CONFIG_BACKTRACE_SELF_TEST is not set
    # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
    # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
    # CONFIG_LKDTM is not set
    # CONFIG_FAULT_INJECTION is not set
    # CONFIG_LATENCYTOP is not set
    # CONFIG_SYSCTL_SYSCALL_CHECK is not set
    # CONFIG_PAGE_POISONING is not set
    CONFIG_HAVE_FUNCTION_TRACER=y
    CONFIG_HAVE_DYNAMIC_FTRACE=y
    CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
    CONFIG_TRACING_SUPPORT=y
    # CONFIG_FTRACE is not set
    # CONFIG_DYNAMIC_DEBUG is not set
    # CONFIG_ATOMIC64_SELFTEST is not set
    # CONFIG_SAMPLES is not set
    CONFIG_HAVE_ARCH_KGDB=y
    # CONFIG_KGDB is not set
    # CONFIG_STRICT_DEVMEM is not set
    # CONFIG_ARM_UNWIND is not set
    # CONFIG_DEBUG_USER is not set
    # CONFIG_DEBUG_ERRORS is not set
    # CONFIG_DEBUG_STACK_USAGE is not set
    CONFIG_DEBUG_LL=y
    CONFIG_EARLY_PRINTK=y
    # CONFIG_DEBUG_ICEDCC is not set
    # CONFIG_OC_ETM is not set
    
    #
    # Security options
    #
    CONFIG_KEYS=y
    CONFIG_KEYS_DEBUG_PROC_KEYS=y
    # CONFIG_SECURITY_DMESG_RESTRICT is not set
    CONFIG_SECURITY=y
    # CONFIG_SECURITYFS is not set
    CONFIG_SECURITY_NETWORK=y
    # CONFIG_SECURITY_NETWORK_XFRM is not set
    # CONFIG_SECURITY_PATH is not set
    # CONFIG_SECURITY_TOMOYO is not set
    # CONFIG_SECURITY_APPARMOR is not set
    # CONFIG_IMA is not set
    CONFIG_DEFAULT_SECURITY_DAC=y
    CONFIG_DEFAULT_SECURITY=""
    CONFIG_CRYPTO=y
    
    #
    # Crypto core or helper
    #
    CONFIG_CRYPTO_ALGAPI=y
    CONFIG_CRYPTO_ALGAPI2=y
    # CONFIG_CRYPTO_MANAGER is not set
    # CONFIG_CRYPTO_MANAGER2 is not set
    # CONFIG_CRYPTO_GF128MUL is not set
    # CONFIG_CRYPTO_NULL is not set
    # CONFIG_CRYPTO_CRYPTD is not set
    # CONFIG_CRYPTO_AUTHENC is not set
    # CONFIG_CRYPTO_TEST is not set
    
    #
    # Authenticated Encryption with Associated Data
    #
    # CONFIG_CRYPTO_CCM is not set
    # CONFIG_CRYPTO_GCM is not set
    # CONFIG_CRYPTO_SEQIV is not set
    
    #
    # Block modes
    #
    # CONFIG_CRYPTO_CBC is not set
    # CONFIG_CRYPTO_CTR is not set
    # CONFIG_CRYPTO_CTS is not set
    # CONFIG_CRYPTO_ECB is not set
    # CONFIG_CRYPTO_LRW is not set
    # CONFIG_CRYPTO_PCBC is not set
    # CONFIG_CRYPTO_XTS is not set
    
    #
    # Hash modes
    #
    # CONFIG_CRYPTO_HMAC is not set
    # CONFIG_CRYPTO_XCBC is not set
    # CONFIG_CRYPTO_VMAC is not set
    
    #
    # Digest
    #
    # CONFIG_CRYPTO_CRC32C is not set
    # CONFIG_CRYPTO_GHASH is not set
    # CONFIG_CRYPTO_MD4 is not set
    # CONFIG_CRYPTO_MD5 is not set
    # CONFIG_CRYPTO_MICHAEL_MIC is not set
    # CONFIG_CRYPTO_RMD128 is not set
    # CONFIG_CRYPTO_RMD160 is not set
    # CONFIG_CRYPTO_RMD256 is not set
    # CONFIG_CRYPTO_RMD320 is not set
    # CONFIG_CRYPTO_SHA1 is not set
    # CONFIG_CRYPTO_SHA256 is not set
    # CONFIG_CRYPTO_SHA512 is not set
    # CONFIG_CRYPTO_TGR192 is not set
    # CONFIG_CRYPTO_WP512 is not set
    
    #
    # Ciphers
    #
    # CONFIG_CRYPTO_AES is not set
    # CONFIG_CRYPTO_ANUBIS is not set
    # CONFIG_CRYPTO_ARC4 is not set
    # CONFIG_CRYPTO_BLOWFISH is not set
    # CONFIG_CRYPTO_CAMELLIA is not set
    # CONFIG_CRYPTO_CAST5 is not set
    # CONFIG_CRYPTO_CAST6 is not set
    # CONFIG_CRYPTO_DES is not set
    # CONFIG_CRYPTO_FCRYPT is not set
    # CONFIG_CRYPTO_KHAZAD is not set
    # CONFIG_CRYPTO_SALSA20 is not set
    # CONFIG_CRYPTO_SEED is not set
    # CONFIG_CRYPTO_SERPENT is not set
    # CONFIG_CRYPTO_TEA is not set
    # CONFIG_CRYPTO_TWOFISH is not set
    
    #
    # Compression
    #
    CONFIG_CRYPTO_DEFLATE=y
    # CONFIG_CRYPTO_ZLIB is not set
    CONFIG_CRYPTO_LZO=y
    
    #
    # Random Number Generation
    #
    # CONFIG_CRYPTO_ANSI_CPRNG is not set
    # CONFIG_CRYPTO_HW is not set
    # CONFIG_BINARY_PRINTF is not set
    
    #
    # Library routines
    #
    CONFIG_BITREVERSE=y
    CONFIG_GENERIC_FIND_LAST_BIT=y
    # CONFIG_CRC_CCITT is not set
    CONFIG_CRC16=y
    # CONFIG_CRC_T10DIF is not set
    # CONFIG_CRC_ITU_T is not set
    CONFIG_CRC32=y
    # CONFIG_CRC7 is not set
    # CONFIG_LIBCRC32C is not set
    CONFIG_ZLIB_INFLATE=y
    CONFIG_ZLIB_DEFLATE=y
    CONFIG_LZO_COMPRESS=y
    CONFIG_LZO_DECOMPRESS=y
    CONFIG_DECOMPRESS_GZIP=y
    CONFIG_DECOMPRESS_BZIP2=y
    CONFIG_DECOMPRESS_LZMA=y
    CONFIG_DECOMPRESS_LZO=y
    CONFIG_HAS_IOMEM=y
    CONFIG_HAS_IOPORT=y
    CONFIG_HAS_DMA=y
    CONFIG_NLATTR=y
    


    --- SPI support
    [*] Debug support for SPI drivers
    *** SPI Master Controller Drivers ***
    < > Utilities for Bitbanging SPI masters
    < > GPIO-based bitbanging SPI Master
    <*> McSPI driver for OMAP/TI81XX
    < > Topcliff PCH SPI Controller
    < > Xilinx SPI controller common module
    < > DesignWare SPI controller core support
    *** SPI Protocol Masters ***
    <*> User mode SPI device driver support
    < > Infineon TLE62X0 (for power switching)

  • Forgot to add you probably have to register a platform device in your board file. I don't know which board you are using. The board file should be in "arch/arm/mach-omap2" or "arch/arm/mach-davinci". The file will start with "board". Look for a matching ".o" to know which one got compiled. This link has a short example of what code to add or modify:

    http://processors.wiki.ti.com/index.php/RF4CE,_simple_linux_target_application

    Look in other board files of similiar processors to see if they registered a SPI platform device

  • Hello,

    The board file is:

    <EZSDK_HOME>/board-support/linux-2.6.37-psp04.04.00.01/arch/arm/mach-omap2/board-ti8168evm.c

    There is also some general information and other useful stuff at:

    http://www.kernel.org/doc/Documentation/spi/

    http://www.kernel.org/doc/Documentation/spi/spidev

    http://www.kernel.org/doc/Documentation/spi/spi-summary

    BR

  • Thank you NOrman Wrong

    I add bord file and trying, but I could not get wll."

    there is not "spidev" list of files (ls /dev)

     I added to the sample as it is.(below)

    board-ti8168evm.c

    struct spi_board_info beagle_mcspi_board_info[] = {

     // spi 4.0 { .modalias = "spidev", .max_speed_hz = 48000000, //48 Mbps .bus_num = 4, .chip_select = 0, .mode = SPI_MODE_1, }, };   static void __init beagle_init_spi(void) { /* hook the spi ports to the spidev driver */ spi_register_board_info( beagle_mcspi_board_info, ARRAY_SIZE( beagle_mcspi_board_info)); }

    ti_8168_evm_init()
    {
    beagle_init_spi(); <- add
    }
  • The file board-ti8168evm.c already has a SPI section. In theory, you should be able to add your "spidev" platform data to existing structure. Remove the "beagle" example code as try adding something like this.

    struct spi_board_info __initdata ti816x_spi_slave_info[] = {
     {
       .modalias      = "m25p80",
       .platform_data = &ti816x_spi_flash,
       .irq           = -1,
       .max_speed_hz  = 75000000,
       .bus_num       = 1,
       .chip_select   = 0,
      },
      {                                    //ADD
        .modalias     = "spidev",          //ADD
        .max_speed_hz = 48000000, //48 Mbps//ADD
        .bus_num      = 0,                 //ADD
        .chip_select  = 0,                 //ADD
        .mode         = SPI_MODE_1,        //ADD
      },                                   //ADD
    };

    Not sure what the bus and chip number should be. I am guessing you want to use bus 0 and chip select 0. The flash is using bus 1/0. From the datasheet, I see that the DM8168 has only 1 SPI port. Maybe you have to use bus 0 and chip select 1?

  • I could not get well.

    I added as below, and verify that spi_register_board_info() occur no errors.

    struct spi_board_info __initdata ti816x_spi_slave_info[] = {
     {
       .modalias      = "m25p80",
       .platform_data = &ti816x_spi_flash,
       .irq           = -1,
       .max_speed_hz  = 75000000,
       .bus_num       = 0,                             //CHANGE TO 0
       .chip_select   = 0,
      },
      {                                                             //ADD
        .modalias     = "spidev",                  //ADD
        .max_speed_hz = 1000000,          //ADD
        .bus_num      = 0,                             //ADD
        .chip_select  = 2,                              //ADD
        .mode         = SPI_MODE_3,           //ADD
      },                                                            //ADD
    };

  • I can't think of anything else. Does your boot log show any m25p80 or spidev messages?  Any udev messages?

  • there are not messages that "m25p80" or "spidev".


    U-Boot 2010.06 (Feb 07 2012 - 17:58:10)

    DRAM: 2 GiB
    Using default environment

    MMC: OMAP SD/MMC: 0
    Hit any key to stop autoboot: 0
    raise: Signal # 8 caught
    reading u-boot.bin

    225692 bytes read
    ## Starting application at 0x80800000 ...


    U-Boot 2010.06 (Jul 18 2012 - 19:33:01)

    TI8168-GP rev 1.1

    ARM clk: 987MHz
    DDR clk: 796MHz
    HDVICP clk: 600MHz
    L3 Fast clk: 560MHz
    HDVPSS clk: 280MHz
    Ducati M3 clk: 280MHz

    I2C: ready
    DRAM: 2 GiB
    NAND: 512 MiB
    MMC: OMAP SD/MMC: 0
    Net: Ethernet PHY: GENERIC @ 0x01
    DaVinci EMAC
    Hit any key to stop autoboot: 1 0
    Connect speed 100M Full
    Using DaVinci EMAC device
    TFTP from server 192.168.1.15; our IP address is 192.168.1.200
    Filename 'uImage'.
    Load address: 0x81000000
    Loading: *#################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    #################################################################
    ################################################
    done
    Bytes transferred = 2570332 (27385c hex)
    ## Booting kernel from Legacy Image at 81000000 ...
    Image Name: Linux-2.6.37
    Created: 2012-07-18 7:09:52 UTC
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 2570268 Bytes = 2.5 MiB
    Load Address: 80008000
    Entry Point: 80008000
    Verifying Checksum ... OK
    Loading Kernel Image ... OK
    OK

    Starting kernel ...

    Uncompressing Linux... done, booting the kernel.
    Linux version 2.6.37 (pal@pal-laptop) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #107 Wed Jul 18 16:09:47 JST 2012
    CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
    CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine: ti8168brast
    vram size = 52428800 at 0x0
    reserved size = 52428800 at 0x0
    FB: Reserving 52428800 bytes SDRAM for VRAM
    Memory policy: ECC disabled, Data cache writeback
    OMAP chip is TI8168 1.1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 51716
    Kernel command line: mem=254M console=ttyO2,115200n8 root=/dev/nfs rw rootfstype=jffs2 nfsroot=192.168.1.15:/home/pal/targetfs/rfs ip=192.168.1.200:192.168.1.15:192.168.1.1:255.255.255.0::eth0:off vram=50M notifyk.vpssm3_sva=0xBF900000
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 204MB = 204MB total
    Memory: 201108k/201108k available, 58988k reserved, 0K highmem
    Virtual kernel memory layout:
    vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
    vmalloc : 0xd0000000 - 0xf8000000 ( 640 MB)
    lowmem : 0xc0000000 - 0xcfe00000 ( 254 MB)
    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
    modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
    .init : 0xc0008000 - 0xc003c000 ( 208 kB)
    .text : 0xc003c000 - 0xc04dc000 (4736 kB)
    .data : 0xc04dc000 - 0xc0525040 ( 293 kB)
    SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    NR_IRQS:407
    IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
    Total of 128 interrupts on 1 active controller
    GPMC revision 6.0
    Trying to install interrupt handler for IRQ400
    Trying to install interrupt handler for IRQ401
    Trying to install interrupt handler for IRQ402
    Trying to install interrupt handler for IRQ403
    Trying to install interrupt handler for IRQ404
    Trying to install interrupt handler for IRQ405
    Trying to install interrupt handler for IRQ406
    Trying to install type control for IRQ407
    Trying to set irq flags for IRQ407
    OMAP clockevent source: GPTIMER1 at 27000000 Hz
    Console: colour dummy device 80x30
    Calibrating delay loop... 986.31 BogoMIPS (lpj=4931584)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: Testing write buffer coherency: ok
    devtmpfs: initialized
    omap_voltage_early_init: voltage driver support not added
    regulator: core version 0.5
    regulator: dummy:
    NET: Registered protocol family 16
    omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
    omap_voltage_add_dev: VDD specified does not exist!
    OMAP GPIO hardware version 0.1
    OMAP GPIO hardware version 0.1
    omap_mux_init: Add partition: #1: core, flags: 0
    pass ti8168_evm_init(904)
    pass ti8168_evm_init(906)
    pass ti8168_evm_init(910)
    _omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
    _omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
    pass ti8168_evm_init(913)
    pass ti8168_evm_init(918)
    pass ti8168_evm_init(921)
    NOR: Can't request GPMC CS
    registered ti816x_gpio_vr device
    pass ti8168_evm_init(944)
    registered ti816x_sr device
    pm_dbg_init: only OMAP3 supported
    registered ti81xx_vpss device
    registered ti81xx_vidout device
    registered ti81xx on-chip HDMI device
    registered ti81xx_fb device
    registered ti81xx_vin device
    ti81xx_pcie: Invoking PCI BIOS...
    ti81xx_pcie: Setting up Host Controller...
    ti81xx_pcie: Register base mapped @0xd0020000
    ti81xx_pcie: Starting PCI scan...
    PCI: bus0: Fast back to back transfers enabled
    pass ti8168_evm_gpio_setup(956)
    pass ti8168_evm_gpio_setup(1168)
    bio: create slab <bio-0> at 0
    regulator: VFB: 800 <--> 1025 mV at 800 mV
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USBSS revision 4ea20808
    registerd cppi-dma Intr @ IRQ 17
    Cppi41 Init Done
    omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
    omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz
    Advanced Linux Sound Architecture Driver Version 1.0.23.
    Switching to clocksource gp timer
    musb-hdrc: version 6.0, host, debug=0
    musb-hdrc musb-hdrc.0: dma type: dma-cppi41
    MUSB controller-0 revision 4ea20800
    musb-hdrc: kernel must blacklist external hubs
    musb-hdrc musb-hdrc.0: MUSB HDRC host driver
    musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: MUSB HDRC host driver
    usb usb1: Manufacturer: Linux 2.6.37 musb-hcd
    usb usb1: SerialNumber: musb-hdrc.0
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    musb-hdrc musb-hdrc.0: USB Host mode controller at d001e000 using DMA, IRQ 18
    musb-hdrc musb-hdrc.1: dma type: dma-cppi41
    MUSB controller-1 revision 4ea20800
    musb-hdrc: kernel must blacklist external hubs
    musb-hdrc musb-hdrc.1: MUSB HDRC host driver
    musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: MUSB HDRC host driver
    usb usb2: Manufacturer: Linux 2.6.37 musb-hcd
    usb usb2: SerialNumber: musb-hdrc.1
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    musb-hdrc musb-hdrc.1: USB Host mode controller at d0026800 using DMA, IRQ 19
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    NetWinder Floating Point Emulator V0.97 (double precision)
    PMU: registered new PMU device of type 0
    omap-iommu omap-iommu.0: ducati registered
    omap-iommu omap-iommu.1: sys registered
    JFFS2 version 2.2. (NAND) ツゥ 2001-2006 Red Hat, Inc.
    msgmni has been set to 392
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0
    omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
    omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
    console [ttyO2] enabled
    brd: module loaded
    loop: module loaded
    ahci ahci.0: forcing PORTS_IMPL to 0x3
    ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
    ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc
    scsi0 : ahci_platform
    scsi1 : ahci_platform
    ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 irq 16
    ata2: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x180 irq 16
    omap2-nand driver initializing
    ONFI flash detected
    ONFI param page 0 valid
    NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron NAND 512MiB 3,3V 8-bit)
    Creating 5 MTD partitions on "omap2-nand.0":
    0x000000000000-0x000000260000 : "U-Boot"
    0x000000260000-0x000000280000 : "U-Boot Env"
    0x000000280000-0x0000006c0000 : "Kernel"
    0x0000006c0000-0x00000cee0000 : "File System"
    0x00000cee0000-0x000020000000 : "Reserved"
    davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
    davinci_mdio davinci_mdio.0: detected phy mask fffffff5
    davinci_mdio.0: probed
    davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown
    davinci_mdio davinci_mdio.0: phy[3]: device 0:03, driver unknown
    usbcore: registered new interface driver cdc_ether
    usbcore: registered new interface driver dm9601
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mice: PS/2 mouse device common for all mice
    omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
    i2c /dev entries driver
    Linux video capture interface: v2.00
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v1.0.0)
    OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    notify_init : notify drivercreated for remote proc id 2 at physical Address 0xbf900000
    usbcore: registered new interface driver snd-usb-audio
    ALSA device list:
    No soundcards found.
    TCP cubic registered
    NET: Registered protocol family 17
    VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
    omap_voltage_late_init: Voltage driver support not added
    Power Management for TI81XX.
    smartreflex smartreflex: Driver initialized
    omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
    mmc0: new high speed SD card at address 0002
    mmcblk0: mmc0:0002 00000 1.86 GiB
    mmcblk0: p1
    davinci_mdio davinci_mdio.0: resetting idled controller
    net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, id=70431)
    IP-Config: Complete:
    device=eth0, addr=192.168.1.200, mask=255.255.255.0, gw=192.168.1.1,
    host=192.168.1.200, domain=, nis-domain=(none),
    bootserver=192.168.1.15, rootserver=192.168.1.15, rootpath=
    PHY: 0:01 - Link is Up - 100/Full
    VFS: Mounted root (nfs filesystem) on device 0:15.
    devtmpfs: mounted
    Freeing init memory: 208K
    INIT: version 2.86 booting
    Error opening /dev/fb0: No such file or directory
    Please wait: booting...
    Starting udev
    udevd (79): /proc/79/oom_adj is deprecated, please use /proc/79/oom_score_adj instead.
    udev: starting version 141
    udevd-event[90]: error changing netif name eth0 to eth1: Device or resource busy

    Root filesystem already rw, not remounting
    Caching udev devnodes
    Populating dev cache
    ALSA: Restoring mixer settings...
    NOT configuring network interfaces: / is an NFS mount
    FAT: invalid media value (0xb9)
    VFS: Can't find a valid FAT filesystem on dev mmcblk0.
    EXT3-fs (mmcblk0): error: can't find ext3 filesystem on dev mmcblk0.
    EXT2-fs (mmcblk0): error: can't find an ext2 filesystem on dev mmcblk0.
    FAT: invalid media value (0xb9)
    VFS: Can't find a valid FAT filesystem on dev mmcblk0.
    Thu Dec 8 06:08:00 UTC 2011
    INIT: Entering runlevel: 5
    ISOFS: Unable to identify CD-ROM format.
    Starting system message bus: dbus.
    Starting telnet daemon.
    Starting syslogd/klogd: done
    Starting thttpd.
    start application

    _ _ ___ _ _ _
    | | | | | ||| |___ ___| | _ ___
    | |_| | |) | ~ | . | _| |/_| -|
    |_____|___ /____/ ___|_| |_| _|-__|

    DVR_Netra Board (2011.04)

    dvr login:

  • Not much to suggest. Maybe put some printk's in the board.c to see if code is being called. Maybe post in the Linux forum.

  • We have the same problem in DVRRDK 03.00.00.00 / UDWORKS platform.
    We try to use SPI device. For this reason I configured in arm/arch/configs/ti8168_dvr_defconfig:

    CONFIG_SPI=y
    CONFIG_SPI_DEBUG=y
    CONFIG_SPI_MASTER=y
    CONFIG_SPI_OMAP24XX=y
    CONFIG_SPI_SPIDEV is not set



    In arm/arch/mach-omap2/board-ti8168dvr.c I added SPI Initialization:

    struct spi_board_info __initdata ti816x_spi_slave_info[] =
    {
      {
          .modalias     = "spidev",
          .max_speed_hz = 100000,
          .bus_num      = 0,
          .chip_select  = 0,
          .mode         = SPI_MODE_0,
      }
    };

    static void __init spi_init(void)
    {
        /* Hook the spi ports to the spidev driver */
        spi_register_board_info( ti816x_spi_slave_info, ARRAY_SIZE( ti816x_spi_slave_info));
            printk(KERN_INFO "spi_register_board_info\n");
    }

    .
    .
    .

    spi_init();


    But we can not get /dev/spidev.
    The attached log file shows no SPI initialization.
    Is here any known issue with DM8168 / DVRRDK / Linux kernel ? Has anyone running SPI on DVRRDK ?

    
    U-Boot 2010.06-svn213 (Mar 07 2013 - 16:44:50)
    
    TI8168-GP rev 1.1
    
    MAIN_N: 56, MAIN_P: 1, OSC_FREQ: 27, FAPLL_K: 8
    ARM clk: 987MHz
    DDR clk: 796MHz
    HDVICP clk: 600MHz
    L3 Fast clk: 500MHz
    HDVPSS clk: 250MHz
    Ducati M3 clk: 250MHz
    DSS clk: 250MHz
    DSP clk: 1000MHz
    
    I2C:   ready
    DRAM:  2 GiB
    NAND:  HW ECC BCH8 Selected
    256 MiB
    MMC:   OMAP SD/MMC: 0
    Net:   Ethernet PHY: GENERIC @ 0x01
    DaVinci EMAC
    Hit any key to stop autoboot:  1  0 
    Connect speed 100M Full
    Using DaVinci EMAC device
    host 192.168.1.20 is alive
    Connect speed 100M Full
    Using DaVinci EMAC device
    TFTP from server 192.168.1.20; our IP address is 192.168.1.10
    Filename 'uImage_DM816X_DVR'.
    Load address: 0x81000000
    Loading: *#################################################################
    	 #################################################################
    	 #############################################
    done
    Bytes transferred = 2565076 (0x2723d4)
    ## Booting kernel from Legacy Image at 81000000 ...
       Image Name:   Linux-2.6.37+
       Created:      2013-04-02   9:04:14 UTC
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    2565012 Bytes = 2.4 MiB
       Load Address: 80008000
       Entry Point:  80008000
       Verifying Checksum ... OK
       Loading Kernel Image ... OK
    OK
    
    Starting kernel ...
    
    Linux version 2.6.37+ (heb@heb) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 Tue Apr 2 11:04:10 CEST 2013
    CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
    CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
    Machine: ti8168_dvr
    vram size = 20971520 at 0x0
    reserved size = 20971520 at 0x0
    FB: Reserving 20971520 bytes SDRAM for VRAM
    Memory policy: ECC disabled, Data cache writeback
    OMAP chip is TI8168 1.1
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 145488
    Kernel command line: rootdelay=1 console=ttyO2,115200n8 init=/linuxrc root=/dev/nfs rw nfsroot=192.168.1.20:/home/heb/tftpboot/rfs_816x ip=192.168.1.10:192.168.1.20:192.168.1.1:255.255.255.0::eth0:off vram=20M notifyk.vpssm3_sva=0xBEE00000 mem=128M mem=472M@0xC0000000 vmalloc=580M
    PID hash table entries: 2048 (order: 1, 8192 bytes)
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 128MB 452MB = 580MB total
    Memory: 583176k/583176k available, 31224k reserved, 139264K highmem
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
        DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
        vmalloc : 0xd4000000 - 0xf8000000   ( 576 MB)
        lowmem  : 0x80000000 - 0xd3c00000   (1340 MB)
        pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
        modules : 0x7f000000 - 0x7fe00000   (  14 MB)
          .init : 0x80008000 - 0x8003b000   ( 204 kB)
          .text : 0x8003b000 - 0x804d9000   (4728 kB)
          .data : 0x804da000 - 0x80522ec0   ( 292 kB)
    SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    NR_IRQS:407
    IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
    Total of 128 interrupts on 1 active controller
    GPMC revision 6.0
    Trying to install interrupt handler for IRQ400
    Trying to install interrupt handler for IRQ401
    Trying to install interrupt handler for IRQ402
    Trying to install interrupt handler for IRQ403
    Trying to install interrupt handler for IRQ404
    Trying to install interrupt handler for IRQ405
    Trying to install interrupt handler for IRQ406
    Trying to install type control for IRQ407
    Trying to set irq flags for IRQ407
    OMAP clockevent source: GPTIMER1 at 27000000 Hz
    Console: colour dummy device 80x30
    Calibrating delay loop... 986.31 BogoMIPS (lpj=4931584)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: Testing write buffer coherency: ok
    devtmpfs: initialized
    omap_voltage_early_init: voltage driver support not added
    regulator: core version 0.5
    regulator: dummy: 
    NET: Registered protocol family 16
    omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
    omap_voltage_add_dev: VDD specified does not exist!
    OMAP GPIO hardware version 0.1
    OMAP GPIO hardware version 0.1
    omap_mux_init: Add partition: #1: core, flags: 0
    3-wired eeprom init done. (H/W ver:ffff)
    _omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
    _omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
    spi_register_board_info
    registered ti816x_sr device
    pm_dbg_init: only OMAP3 supported
    registered ti81xx_vpss device
    registered ti81xx_vidout device
    registered ti81xx on-chip HDMI device
    registered ti81xx_fb device
    ti81xx_pcie: Invoking PCI BIOS...
    ti81xx_pcie: Setting up Host Controller...
    ti81xx_pcie: Register base mapped @0xd4020000
    ti81xx_pcie: Starting PCI scan...
    PCI: bus0: Fast back to back transfers enabled
    bio: create slab <bio-0> at 0
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USBSS revision 4ea20808
    registerd cppi-dma Intr @ IRQ 17
    Cppi41 Init Done
    omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
    regulator: pmbus_vr: 800 <--> 1050 mV at 1000 mV 
    regulator: tps40400 probe done.
    omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
    Advanced Linux Sound Architecture Driver Version 1.0.23.
    Switching to clocksource gp timer
    musb-hdrc: version 6.0, host, debug=0
    musb-hdrc musb-hdrc.0: dma type: dma-cppi41
    MUSB controller-0 revision 4ea20800
    musb-hdrc: kernel must blacklist external hubs
    musb-hdrc musb-hdrc.0: MUSB HDRC host driver
    musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: MUSB HDRC host driver
    usb usb1: Manufacturer: Linux 2.6.37+ musb-hcd
    usb usb1: SerialNumber: musb-hdrc.0
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    musb-hdrc musb-hdrc.0: USB Host mode controller at d401e000 using DMA, IRQ 18
    musb-hdrc musb-hdrc.1: dma type: dma-cppi41
    MUSB controller-1 revision 4ea20800
    musb-hdrc: kernel must blacklist external hubs
    musb-hdrc musb-hdrc.1: MUSB HDRC host driver
    musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: MUSB HDRC host driver
    usb usb2: Manufacturer: Linux 2.6.37+ musb-hcd
    usb usb2: SerialNumber: musb-hdrc.1
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    musb-hdrc musb-hdrc.1: USB Host mode controller at d4026800 using DMA, IRQ 19
    NET: Registered protocol family 2
    IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
    TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
    TCP: Hash tables configured (established 65536 bind 65536)
    TCP reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    NetWinder Floating Point Emulator V0.97 (double precision)
    PMU: registered new PMU device of type 0
    omap-iommu omap-iommu.0: ducati registered
    omap-iommu omap-iommu.1: sys registered
    highmem bounce pool size: 64 pages
    JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    msgmni has been set to 867
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0
    omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
    omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
    console [ttyO2] enabled
    brd: module loaded
    loop: module loaded
    ahci ahci.0: forcing PORTS_IMPL to 0x3
    ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
    ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc 
    scsi0 : ahci_platform
    scsi1 : ahci_platform
    ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 irq 16
    ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 16
    omap2-nand driver initializing
    NAND device: Maf ID: 0xec, Chip ID: 0xda (Samsung, )
     erasesize: 0x20000, writesize: 2048, oobsize: 64
    Creating 6 MTD partitions on "omap2-nand.0":
    0x000000000000-0x000000240000 : "U-Boot"
    0x000000240000-0x000000280000 : "U-Boot Env"
    0x000000280000-0x000000580000 : "U-Boot Logo"
    0x000000580000-0x0000009c0000 : "Kernel"
    0x0000009c0000-0x00000d1e0000 : "File System"
    0x00000d1e0000-0x000010000000 : "Reserved"
    davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
    davinci_mdio davinci_mdio.0: detected phy mask fffffff8
    davinci_mdio.0: probed
    davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver unknown
    davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown
    davinci_mdio davinci_mdio.0: phy[2]: device 0:02, driver unknown
    usbcore: registered new interface driver cdc_ether
    usbcore: registered new interface driver dm9601
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mice: PS/2 mouse device common for all mice
    usb 1-1: new high speed USB device using musb-hdrc and address 2
    rtc-ds1307 1-0068: rtc core: registered ds1337 as rtc0
    omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc1
    i2c /dev entries driver
    Linux video capture interface: v2.00
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v1.0.0)
    OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    notify_init : notify drivercreated  for  remote proc id 2 at physical Address 0xbee00000
    usbcore: registered new interface driver snd-usb-audio
    Registered tvp5158 audio codec
    asoc: tvp5158-hifi <-> davinci-mcasp.0 mapping ok
    asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok
    asoc: HDMI-DAI-CODEC <-> hdmi-dai mapping ok
    ALSA device list:
      #0: TI81XX DVR
    TCP cubic registered
    NET: Registered protocol family 17
    VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
    omap_voltage_late_init: Voltage driver support not added
    Power Management for TI81XX.
    smartreflex-ti816x: ti816x_sr_probe done!
    rtc-ds1307 1-0068: setting system clock to 2040-04-26 00:19:43 UTC (2219012383)
    usb 1-1: New USB device found, idVendor=0409, idProduct=005a
    usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    davinci_mdio davinci_mdio.0: resetting idled controller
    net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, id=1cc915)
    IP-Config: Complete:
         device=eth0, addr=192.168.1.10, mask=255.255.255.0, gw=192.168.1.1,
         host=192.168.1.10, domain=, nis-domain=(none),
         bootserver=192.168.1.20, rootserver=192.168.1.20, rootpath=
    Waiting 1sec before mounting root device...
    PHY: 0:01 - Link is Up - 100/Full
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: link is slow to respond, please be patient (ready=0)
    ata2: softreset failed (device not ready)
    ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata2.00: ATA-8: FUJITSU MHZ2320BH G2, 00000009, max UDMA/100
    ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata2.00: configured for UDMA/100
    scsi 1:0:0:0: Direct-Access     ATA      FUJITSU MHZ2320B 0000 PQ: 0 ANSI: 5
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda: sda1
    sd 1:0:0:0: [sda] Attached SCSI disk
    VFS: Mounted root (nfs filesystem) on device 0:15.
    devtmpfs: mounted
    Freeing init memory: 204K
     Mounting /proc             : [SUCCESS]
     Mounting /sys              : [SUCCESS]
     Mounting /dev              : [SUCCESS]
     Mounting /dev/pts          : [SUCCESS]
     Enabling hot-plug          : [SUCCESS]
     Populating /dev            : EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
    [SUCCESS]
    Starting telnet daemon.
    Starting syslogd/klogd: done
    Starting pure-ftpd daemon.
    Starting smbd daemonMar 20 17:51:38 192 syslog.info syslogd started: BusyBox v1.19.4
    Mar 20 17:51:38 192 user.warn kernel: Trying to install interrupt handler for IRQ401
    Mar 20 17:51:38 192 user.warn kernel: Trying to install interrupt handler for IRQ402
    Mar 20 17:51:38 192 user.warn kernel: Trying to install interrupt handler for IRQ403
    Mar 20 17:51:38 192 user.warn kernel: Trying to install interrupt handler for IRQ404
    Mar 20 17:51:38 192 user.warn kernel: Trying to install interrupt handler for IRQ405
    Mar 20 17:51:38 192 user.warn kernel: Trying to install interrupt handler for IRQ406
    Mar 20 17:51:38 192 user.err kernel: Trying to install type control for IRQ407
    Mar 20 17:51:38 192 user.err kernel: Trying to set irq flags for IRQ407
    Mar 20 17:51:38 192 user.info kernel: OMAP clockevent source: GPTIMER1 at 27000000 Hz
    Mar 20 17:51:38 192 user.warn kernel: Console: colour dummy device 80x30
    Mar 20 17:51:38 192 user.info kernel: Calibrating delay loop... 986.31 BogoMIPS (lpj=4931584)
    Mar 20 17:51:38 192 user.info kernel: pid_max: default: 32768 minimum: 301
    Mar 20 17:51:38 192 user.info kernel: Security Framework initialized
    Mar 20 17:51:38 192 user.warn kernel: Mount-cache hash table entries: 512
    Mar 20 17:51:38 192 user.info kernel: CPU: Testing write buffer coherency: ok
    Mar 20 17:51:38 192 user.info kernel: devtmpfs: initialized
    Mar 20 17:51:38 192 user.warn kernel: omap_voltage_early_init: voltage driver support not added
    Mar 20 17:51:38 192 user.info kernel: regulator: core version 0.5
    Mar 20 17:51:38 192 user.info kernel: regulator: dummy: 
    Mar 20 17:51:38 192 user.info kernel: NET: Registered protocol family 16
    Mar 20 17:51:38 192 user.err kernel: omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
    Mar 20 17:51:38 192 user.warn kernel: omap_voltage_add_dev: VDD specified does not exist!
    Mar 20 17:51:38 192 user.info kernel: OMAP GPIO hardware version 0.1
    Mar 20 17:51:38 192 user.info kernel: OMAP GPIO hardware version 0.1
    Mar 20 17:51:38 192 user.info kernel: omap_mux_init: Add partition: #1: core, flags: 0
    Mar 20 17:51:38 192 user.warn kernel: 3-wired eeprom init done. (H/W ver:ffff)
    Mar 20 17:51:38 192 user.err kernel: _omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
    Mar 20 17:51:38 192 user.err kernel: _omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
    Mar 20 17:51:38 192 user.info kernel: spi_register_board_info
    Mar 20 17:51:38 192 user.info kernel: registered ti816x_sr device
    Mar 20 17:51:38 192 user.err kernel: pm_dbg_init: only OMAP3 supported
    Mar 20 17:51:38 192 user.info kernel: registered ti81xx_vpss device
    Mar 20 17:51:38 192 user.info kernel: registered ti81xx_vidout device
    Mar 20 17:51:38 192 user.info kernel: registered ti81xx on-chip HDMI device
    Mar 20 17:51:38 192 user.info kernel: registered ti81xx_fb device
    Mar 20 17:51:38 192 user.info kernel: ti81xx_pcie: Invoking PCI BIOS...
    Mar 20 17:51:38 192 user.info kernel: ti81xx_pcie: Setting up Host Controller...
    Mar 20 17:51:38 192 user.info kernel: ti81xx_pcie: Register base mapped @0xd4020000
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Setting outbound translation for 0x20000000-0x2fffffff
    Mar 20 17:51:38 192 user.info kernel: ti81xx_pcie: Starting PCI scan...
    Mar 20 17:51:38 192 user.debug kernel: pci_bus 0000:00: scanning bus
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:00:00..
    Mar 20 17:51:38 192 user.debug kernel: failed. No link/device.
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:01:00..
    Mar 20 17:51:38 192 user.debug kernel: failed. No link/device.
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:02:00..
    Mar 20 17:51:38 192 user.debug kernel: failed. No link/device.
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:03:00..
    Mar 20 17:51:38 192 user.debug kernel: failed. No link/device.
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:04:00..
    Mar 20 17:51:38 192 user.debug kernel: failed. No link/device.
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:05:00..
    Mar 20 17:51:38 192 user.debug kernel: failed. No link/device.
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:06:00..
    Mar 20 17:51:38 192 user.debug kernel: failed. No link/device.
    Mar 20 17:51:38 192 user.debug kernel: ti81xx_pcie: Reading config[0] for device 0000:07:00..Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 Mar 20 17:51:38 .
    Starting nmbd daemon.
    *** Bootargs Validated for mem param ***
    *** Bootargs Validated for notifyk.vpssm3 params ***
    Kernel bootargs validated
    numid=101,iface=MIXER,name='Left DAC Mux'
      ; type=ENUMERATED,access=rw------,values=1,items=3
      ; Item #0 'DAC_L1'
      ; Item #1 'DAC_L3'
      ; Item #2 'DAC_L2'
      : values=2
    numid=99,iface=MIXER,name='Right DAC Mux'
      ; type=ENUMERATED,access=rw------,values=1,items=3
      ; Item #0 'DAC_R1'
      ; Item #1 'DAC_R3'
      ; Item #2 'DAC_R2'
      : values=2
     [c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
     [m3video] Remote Debug Shared Memory @ 0xbf005020
     [m3vpss ] Remote Debug Shared Memory @ 0xbf00a040
    SysLink version : 2.10.02.17
    SysLink module created on Date:Mar 19 2013 Time:17:32:24
    Trace enabled
    Trace SetFailureReason enabled
    Mar 20 17:51:40 192 user.alert kernel: SysLink version : 2.10.02.17
    Mar 20 17:51:40 192 user.alert kernel: SysLink module created on Date:Mar 19 2013 Time:17:32:24
    Mar 20 17:51:40 192 user.alert kernel: Trace enabled
    Mar 20 17:51:40 192 user.alert kernel: Trace SetFailureReason enabled
     Setting DMM priority for [DUCATI  ] to [0] ( 0x4e000624 = 0x08000000 )
     Setting DMM priority for [HDVICP0 ] to [2] ( 0x4e000634 = 0x0000000a )
     Setting DMM priority for [HDVICP1 ] to [2] ( 0x4e000634 = 0x000a0000 )
     Setting DMM priority for [HDVICP2 ] to [2] ( 0x4e000634 = 0x00a00000 )
     
     *** TVP5158 probe : START ***
     
     TI VS EVM : TVP5158 device address : 0x58, 0x5a, 0x5c, 0x5e
     TI DVR    : TVP5158 device address : 0x5c, 0x5d, 0x5e, 0x5f
     
     Device found     : I2C (0xXX): 0x08 = 0x51
                        I2C (0xXX): 0x09 = 0x58
     
     Device NOT found : I2C (0xXX): Read ERROR !!! (reg[0x08], count = 2)
     
    Mar 20 17:51:42 192 user.err OSA_I2C : OSA_i2cRead8: I2C (0x58): Read ERROR! (reg[0x08], count = 2)
     I2C (0x58): Read ERROR !!! (reg[0x08], count = 2)
    Mar 20 17:51:42 192 user.err OSA_I2C : OSA_i2cRead8: I2C (0x5a): Read ERROR! (reg[0x08], count = 2)
     I2C (0x5a): Read ERROR !!! (reg[0x08], count = 2)
     I2C (0x5c): 0x08 = 0x51 
     I2C (0x5c): 0x09 = 0x58 
     I2C (0x5d): 0x08 = 0x51 
     I2C (0x5d): 0x09 = 0x58 
     I2C (0x5e): 0x08 = 0x51 
     I2C (0x5e): 0x09 = 0x58 
     I2C (0x5f): 0x08 = 0x51 
     I2C (0x5f): 0x09 = 0x58 
     
     *** TVP5158 probe : END ***
     
    /opt/ti816x
    Attached to slave procId 2.
    Loaded file ../firmware/dvr_rdk_fw_m3vpss.xem3 on slave procId 2.
    Started slave procId 2.
    After Ipc_loadcallback status [0x00000000]
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ] ***** SYSTEM  : Frequency <ORG> - 250000000, <NEW> - 250000000
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ] notify_attach  rtnVal  0
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ] initProxyServer  rtnVal  0
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  *** UTILS: CPU KHz = 500000 Khz ***
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  47: SYSTEM  : System Common Init in progress !!!
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  48: SYSTEM: IPC init in progress !!!
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  48: SYSTEM: Attaching to [HOST] ... 
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  1048: SYSTEM: Attaching to [HOST] ... 
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  1050: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
    Mar 20 17:51:44 192 user.info Remote debug client : [m3vpss ]  1050: SYSTEM: Attaching to [DSP] ... 
    After Ipc_startcallback status [0x097d2000]
    Attached to slave procId 1.
    Loaded file ../firmware/dvr_rdk_fw_m3video.xem3 on slave procId 1.
    Started slave procId 1.
    After Ipc_loadcallback status [0x00000000]
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video] ***** SYSTEM  : Frequency <ORG> - 250000000, <NEW> - 250000000
    Mar 20 17:51:45 192 user.info Remote debug client : [m3vpss ]  2050: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  *** UTILS: CPU KHz = 500000 Khz ***
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  1656: SYSTEM  : System Common Init in progress !!!
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  1656: SYSTEM: IPC init in progress !!!
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  1656: SYSTEM: Attaching to [HOST] ... 
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  2656: SYSTEM: Attaching to [HOST] ... 
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  2658: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
    Mar 20 17:51:45 192 user.info Remote debug client : [m3video]  2658: SYSTEM: Attaching to [DSP] ... 
    After Ipc_startcallback status [0x00000000]
    Attached to slave procId 0.
    Loaded file ../firmware/dvr_rdk_fw_c6xdsp.xe674 on slave procId 0.
    Started slave procId 0.
    After Ipc_loadcallback status [0x00000000]
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ] ***** SYSTEM  : Frequency <ORG> - 800000000, <NEW> - 800000000
    Mar 20 17:51:46 192 user.info Remote debug client : [m3video]  3658: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:46 192 user.info Remote debug client : [m3vpss ]  3050: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  *** UTILS: CPU KHz = 800000 Khz ***
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  7: SYSTEM  : System Common Init in progress !!!
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  7: SYSTEM: IPC init in progress !!!
    Mar 20 17:51:46 192 user.info Remote debug cDMA: Module install successful, device major num = 251 
    lient : [c6xdsp DRV: Module install successful
    ]  7: SYSTEM: AtDRV: Module built on Mar 28 2013 16:23:25 
    taching to [HOST] ... 
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  1265: SYSTEM: Attaching to [HOST] ... 
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  1268: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
    Mar 20 17:51:46 192 user.info Remote debug client : [c6xdsp ]  1268: SYSTEM: Attaching to [VIDEO-M3] ... 
    After Ipc_startcallback status [0x00000000]
    Mar 20 17:51:46 192 user.info kernel: DMA: Module install successful, device major num = 251 
    Mar 20 17:51:46 192 user.info kernel: DRV: Module install successful
    Mar 20 17:51:46 192 user.info kernel: DRV: Module built on Mar 28 2013 16:23:25 
     [c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
     [m3video] Remote Debug Shared Memory @ 0xbf005020
     [m3vpss ] Remote Debug Shared Memory @ 0xbf00a040
    Mar 20 17:51:47 192 user.info Remote debug client : [m3vpss ]  4050: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:47 192 user.info Remote debug client : [m3video]  4658: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:47 192 user.info Remote debug client : [c6xdsp ]  2527: SYSTEM: Attaching to [VIDEO-M3] ... 
    Mar 20 17:51:48 192 user.info Remote debug client : [m3vpss ]  5050: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:48 192 user.info Remote debug client : [c6xdsp ]  3534: SYSTEM: Attaching to [VIDEO-M3] ... SUCCESS !!!
    Mar 20 17:51:48 192 user.info Remote debug client : [m3video]  5658: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:48 192 user.info Remote debug client : [c6xdsp ]  3534: SYSTEM: Attaching to [VPSS-M3] ... 
    Mar 20 17:51:48 192 user.info Remote debug client : [m3video]  5658: SYSTEM: Attaching to [DSP] ... SUCCESS !!!
    Mar 20 17:51:48 192 user.info Remote debug client : [m3video]  5659: SYSTEM: Attaching to [VPSS-M3] ... 
    Mar 20 17:51:49 192 user.info Remote debug client : [m3vpss ]  6050: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:49 192 user.info Remote debug client : [m3video]  6658: SYSTEM: Attaching to [VPSS-M3] ... 
    Mar 20 17:51:49 192 user.info Remote debug client : [c6xdsp ]  4793: SYSTEM: Attaching to [VPSS-M3] ... 
    Mar 20 17:51:50 192 user.info Remote debug client : [c6xdsp ]  5274: SYSTEM: Attaching to [VPSS-M3] ... SUCCESS !!!
    Mar 20 17:51:50 192 user.info Remote debug client : [m3vpss ]  7050: SYSTEM: Attaching to [DSP] ... 
    Mar 20 17:51:50 192 user.info Remote debug client : [c6xdsp ]  5274: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
    Mar 20 17:51:50 192 user.info Remote debug client : [m3vpss ]  7050: SYSTEM: Attaching to [DSP] ... SUCCESS !!!
    Mar 20 17:51:50 192 user.info Remote debug client : [m3vpss ]  7050: SYSTEM: Attaching to [VIDEO-M3] ... 
    Mar 20 17:51:50 192 user.info Remote debug client : [m3video]  7658: SYSTEM: Attaching to [VPSS-M3] ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8050: SYSTEM: Attaching to [VPSS-M3] ... SUCCESS !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8050: SYSTEM: Attaching to [VIDEO-M3] ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8050: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8050: SYSTEM: Attaching to [VIDEO-M3] ... SUCCESS !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8051: SYSTEM: Creating MsgQ [VIDEO-M3_MSGQ] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8050: SYSTEM: Creating MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8051: SYSTEM: Creating MsgQ [VIDEO-M3_ACK_MSGQ] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8050: SYSTEM: Creating MsgQ [VPSS-M3_MSGQ] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8051: SYSTEM: Creating MsgQ [VPSS-M3_ACK_MSGQ] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6532: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8053: SYSTEM: Notify register to [HOST] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8052: SYSTEM: Notify register to [HOST] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6533: SYSTEM: Creating MsgQ [DSP_MSGQ] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8053: SYSTEM: Notify register to [DSP] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8053: SYSTEM: Notify register to [DSP] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6533: SYSTEM: Creating MsgQ [DSP_ACK_MSGQ] ...
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8053: SYSTEM: Notify register to [VPSS-M3] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8053: SYSTEM: Notify register to [VIDEO-M3] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6533: SYSTEM: Notify register to [HOST] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8053: SYSTEM: IPC init DONE !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8053: SYSTEM: IPC init DONE !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6533: SYSTEM: Notify register to [VIDEO-M3] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6533: SYSTEM: Notify register to [VPSS-M3] line 0, event 15 ... 
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6533: SYSTEM: IPC init DONE !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6535: MEM: Shared Region 2: Base = 0xb0000000, Length = 0x0e9c0000 (233 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8059: MEM: Shared Region 2: Base = 0xb0000000, Length = 0x0e9c0000 (233 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8059: MEM: Shared Region 2: Base = 0xb0000000, Length = 0x0e9c0000 (233 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6535: MEM: ERROR: SharedRegion_setEntry (2, 0x9ff3855c) FAILED !!!  (status=-1) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8060: MEM: Shared Region 1: Base = 0x88000000, Length = 0x15000000 (336 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8059: MEM: Shared Region 1: Base = 0x88000000, Length = 0x15000000 (336 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8061: SYSTEM  : System Common Init Done !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8061: SYSTEM  : System Common Init Done !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8062: SYSTEM  : System Video Init in progress !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8061: SYSTEM  : System VPSS Init in progress !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8062: SYSTEM  : System Video Init Done !!!
    Mar 20 17:51:51 192 user.info Remote debug cliMar 20 17:51:51 Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6Mar 20 17:51:51 Mar 20 17:51:51 Mar 20 17:51:51 Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  6Mar 20 17:51:51 192 user.info Remote debug client : [c6xdsp ]  5Mar 20 17:51:51 Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8Mar 20 17:51:51 Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8Mar 20 17:51:51 192 user.info Remote debug clienMar 20 17:51:51 192 user.info Remote debug client : [m3video]  8Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8Mar 20 17:51:51 192 user.info Remote debug client : [m3video]  8Mar 20 17:51:51 192 user.info Remote debug clienMar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8169: SYSTEM  : FVID2 Init in progress DONE !!!
    M[module] vpss probe done.
    ar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8169: SYSTEM  : Device Init in progress !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ] initPrms.isI2cInitReq = 0
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ] initPrms.isI2cInitReq = 0
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8173: SYSTEM  : Device Init in progress DONE !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8306: SYSTEM  : System VPSS Init Done !!!
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8306: UTILS: DMA: HWI Create for INT63 !!!
    Mar 20 17:51:51 192 user.info[module] ti81xxfb probe done.
     Remote debug client : [m3vpss ]  8306: SYSTEM  : Initializing Links !!! 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8306: SYSTEM  : FREE SPACE : System Heap      = 13024 B, Mbx = 10240 msgs) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8307: SYSTEM  : FREE SPACE : SR0 Heap     HDMI W1 rev 2.0
        = 13452672 B (12 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8307: SYSTEM  : FREE SPACE : Frame Buffer     = 240794[module] ti81xx_hdmi probe done.
    496 B (229 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8307: SYSTEM  : FREE SPACE : Bitstream Buffer = 352321408 B (335 MB) 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8307: SYSTEM  : FREE SPACE : Tiler 8-bit      = 134217728 B (128 MB)  - TILER ON 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8307: SYSTEM  : FREE SPACE : Tiler 16-bit     = 134217728 B (128 MB)  - TILER ON 
     [m3vpss ] Received character 's'
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8420: SYSTEM  : Initializing Links ... DONE !!! 
    Mar 20 17:51:51 192 user.info Remote debug client : [m3vpss ]  8421: SYSTEM  : Set Static L3 pressure for HDVPSS as High
     [c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
     [m3video] Remote Debug Shared Memory @ 0xbf005020
     [m3vpss ] Remote Debug Shared Memory @ 0xbf00a040
     [m3video] Received character 's'
     [c6xdsp ] Remote Debug Shared Memory @ 0xbf000000
     [m3video] Remote Debug Shared Memory @ 0xbf005020
     [m3vpss ] Remote Debug Shared Memory @ 0xbf00a040
     [c6xdsp ] Received character 's'
    /opt/ti816x
    Mar 20 17:51:51 192 user.warn kernel: [module] vpss probe done.
    Mar 20 17:51:51 192 user.warn kernel: [module] ti81xxfb probe done.
    Mar 20 17:51:51 192 user.info kernel: HDMI W1 rev 2.0
    Mar 20 17:51:51 192 user.warn kernel: [module] ti81xx_hdmi probe done.
    I2C No Ack
    Mar 20 17:51:51 192 user.warn kernel: I2C No Ack
     
     ORG 0x46c00524: 0
     NEW 0x46c00524: 2
     
    Mar 20 17:51:53 192 daemon.info linuxrc: starting pid 185, tty '': '/opt/ti816x/bin/launcher.out'
    Mar 20 17:51:53 192 daemon.info linuxrc: starting pid 186, tty '': '/sbin/syslogd -n'
    
    
    
    Mar 20 17:51:53 192 daemon.info linuxrc: starting pid 187, tty '': '/sbin/klogd -n'
    Mar 20 17:51:53 192 daemon.info linuxrc: starting pid 189, tty '': '-/bin/sh'
    Mar 20 17:51:53 192 syslog.info syslogd started: BusyBox v1.19.4
    Mar 20 17:51:53 192 user.notice kernel: klogd started: BusyBox v1.19.4 (2013-03-19 17:44:58 CET)
    Mar 20 17:51:53 192 user.notice PCA9502 : Camera power supply ON
    Mar 20 17:51:53 192 user.info WATCHDOG : watchdog_SetTimeout: New timeout: 20 seconds
    Mar 20 17:51:53 192 user.info LAUNCHER : startup: starting DMP
    .
    .
    .
    


  • I am the author.
    This problem could be resolved on their own.

    Try changing to 1 bus_num.
    That way, spidev you will become visible.

  • Yes this works. Thanks for Your advice.

    Best regards

    Holger

  • Hi,

    Shinji1, many thanks for sharing your solution.

    Holger, thank you for your confirmation as well.

    BR

    Vladimir