• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 449 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

compilation error while building filesystem for android-gingerbread-2.3

sreeram palvadi
Prodigy 60 points

hi

i am sreeram

I am copmpailing android source code for breagleboard xm c, i am following TI-Android-GingerBread-2.3.4-DevKit-2.1 DeveloperGuide

I compailed x-loder and u-boot ,linux kernel also but i strucked at copailing of filesyatem , i got below this error

PLEASE CAN U HELP ME?

igx@igx-20:~/rowboat-android1$  make TARGET_PRODUCT=  beagleboard OMAPES=5.x -j8
build/core/product_config.mk:203: *** No matches for product "".  Stop.
  • 0
    TI__Genius 10210 points

    sreeram palvadi said:

    igx@igx-20:~/rowboat-android1$  make TARGET_PRODUCT=  beagleboard OMAPES=5.x -j8

    Please use the command  make TARGET_PRODUCT=beagleboard OMAPES=5.x -j8

    Note there is no space after the = sign.

  • 0 in reply to Vishveshwar Bhat
    Prodigy 60 points

    thnk u

    I did totoal procedure which is present in the TI-Android-GingerBread-2.3.4-DevKit-2.1 DeveloperGuide . But my sd card not booting in beagleboard xm.it showing error following way

    Texas Instruments X-Loader 1.51 (Jul 20 2012 - 10:09:47)                     
    Unsupported Chip!                                                            
    Beagle xM Rev C                                                              
    Starting X-loader on MMC                
    Reading boot sector                     
                                            
    213256 Bytes Read from MMC              
    Starting OS Bootloader from MMC...      
    Starting OS Bootloader...               


    U-Boot 2010.06 (Jul 20 2012 - 10:16:09)
                                                                                    
    OMAP34xx/35xx-GP ES2.1, CPU-OPP2 L3-165MHz                                      
    OMAP3 Beagle board + LPDDR/NAND                                                 
    I2C:   ready                                                                    
    DRAM:  384 MiB                                                                  
    NAND:  HW ECC [Kernel/FS layout] selected                                       
    0 MiB                                                                           
    *** Warning - bad CRC or NAND, using default environment                        
                                                                                    
    In:    serial                                                                   
    Out:   serial                                                                   
    Err:   serial                                                                   
    Beagle xM Rev A/C                                                               
    Die ID #6a1200029ff80000016830101501702c                                        
    Hit any key to stop autoboot:  0                                                
    mmc1 is available                                                               
    reading boot.scr                                                                
                                                                                    
    461 bytes read                                                                  
    Running bootscript from mmc ...                                                 
    ## Executing script at 82000000                                                 
    reading uImage                                                                  
                                                                                    
    2744928 bytes read                                                              
    ***** Kernel: /dev/mmcblk0p1/uImage *****                                       
    ***** RootFS: /dev/mmcblk0p2 *****                                              
    ## Booting kernel from Legacy Image at 82000000 ...                             
       Image Name:   Linux-2.6.37-g06ebbba                                          
       Image Type:   ARM Linux Kernel Image (uncompressed)                          
       Data Size:    2744864 Bytes = 2.6 MiB                                        
       Load Address: 80008000                                                       
       Entry Point:  80008000                                                       
       Verifying Checksum ... OK                                                    
       Loading Kernel Image ... OK                                                  
    OK                                                                              
                                                                                    
    Starting kernel ...                                                             
                                                                                    
    Uncompressing Linux... done, booting the kernel

    what i will do to go further........