• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 309 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Running program on a TMS320C6713 DSK without having to plug it in the computer

Vincent Grenier-Horth
Prodigy 100 points

Hi,

I'm new to the TMS320C6713 DSK, and to programming DSP in general, and I need to know how to run my program without plugging the DSK in a computer. If anyone can show me how to do it, or give me the documentation required to do so, it would be greatly appreciated. I use CCS v5.2(the lasted version as the day I'm writing this message) to program the DSK.

Vincent Grenier-Horth

University of Sherbrooke

  • 0
    TI__Guru* 84110 points

    Vincent,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages. Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics.

    The C6713 DSK has a Flash memory on the board. You can program that and boot from it. The Flashburn utility was used with CCS 3.3, but I do not know if it has been updated for CCSv5. You may want to contact the board manufacturer (Spectrum Digital?) to see if they have an updated Flash programming tool.

    Regards,
    RandyP