• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 461 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS 3.3 and SYS/BIOS cfg file for UART interrupt

xiang_li
Intellectual 935 points
Other Parts Discussed in Thread: SYSBIOS

HI,

Could you tell me the .cfg file in where?I can`t find it.

I think the cfg file,doesn`t like CCS v3.3?

I have include ti/sysbios/family/c66/tci66xx/CpIntc.h

I am trying change uart to use interrupt  like this text owner.

The forum is good for me.

Thx

Li

  • 0
    TI__Guru* 84110 points

    Li,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages. Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics.

    This is a new question that is not the same as the thread to which this was originally posted at the end. There is a link to that thread in your post, above.

    I do not believe SYS/BIOS is compatible with CCS 3.3. The process you will follow is different.

    I know that CCS 3.3 is not compatible with the C6678, if that is the processor you are using.

    Please upgrade to CCSv5.2 or later, and then tell us more about your question and which processor you are using.

    Regards,
    RandyP

  • 0 in reply to RandyP
    Intellectual 935 points

     HI RandyP

     Thanks your anwser.

    I have solve the problem already.