OMAP3530 Interfacing

naga jyothi

Other Parts Discussed in Thread: OMAP3530

hi,

iam designing a OMAP3530 based board.i have a doubt regarding ethernet interface and RS422 interface.

my doubt is.........

how can i interface ethernet to omap3530 without pop memory? if we are using pop memory,we can directly interface with GPMC.

and can you please help me how to interface RS422 to OMAP3530 interface.

Thanks

Jyothi

0 Jethin Sekhar over 13 years ago

Expert 1130 points

Jyothi,

You can interface both ethernet and nand in different chip selects.

Regards

Jethin

0 naga jyothi over 13 years ago in reply to Jethin Sekhar

Thank you sir,

Can you suggest RS422 device part number that supports OMAP3530 and how it is interface with OMAP3530.

Regards,

Jyothi

0 Brahim HAMADICHAREF over 13 years ago in reply to naga jyothi

Rs422 should be wired to the uart, find a suitable chip from

Different manufacturer, TI has surely one ...

0 Brahim HAMADICHAREF over 13 years ago in reply to Brahim HAMADICHAREF

As for an example for ethernet look at the schematics of the board from Gumstix, they have plenty of example like Tobi or Chestnut

Regards

Brahim

Processors forum