Clock Skew Detected

Thiyagarajan . S

hi,

when i build or rebuild the project in code composer studio, continuously one warning is coming but the code was working fine and i got output for that code. i want to avoid this WARNING , FOR WHAT TYPE OF ISSUE THIS WARNING WILL OCCUR ???????????

Warning Message for your Reference:

<Linking>
'Finished building target: led.out'
' '
C:\Program Files\Texas Instruments\ccsv4\utils\gmake\gmake: *** Warning: Clock skew detected. Your build may be incomplete.
Build complete for project led

I WANT TO AVOID THIS WARNING .......

Many Thanks,

Thiyagarajan.S

over 13 years ago

0 Mark M over 13 years ago

TI__Mastermind 30110 points

Hi Thiyagarajan,

Quick search - This warning usually comes up if the source files have a newer time stamp than the generated .out file.

Are you working across timezones or somewhen in the future?

Check the Last Modified time of the source files, make sure they are modified in the past, and try to build again.

Hope this helps,
Mark

0 Brian Willoughby over 13 years ago

Genius 4630 points

This could be related to FAT32 file system time granularity versus gmake. I believe that I solved this by converting to HPFS, but I cannot remember for certain, and I've since stopped using the machine with the problem. For more information, see this thread that I started back in 2010:

Unexplained clock skew with 4.1.1.00014 - Code Composer Forum - Code Composer Studio - TI E2E Community

Processors

Processors forum

Clock Skew Detected