Where does de-mux code for TVP5158 locate in DVRRDK3.0?

Shane Huang

Prodigy 135 points

Other Parts Discussed in Thread: TVP5158

Dear all,

I want to locate the de-mux code for to check how the frame output from TVP5158 is de-muxed. But where does it locate?

Regards,

Shane

over 13 years ago

0 Brijesh Jadav over 13 years ago

TI__Guru**** 475745 points

Hi,

De-muxing is done by the video port, it is not done by tvp5158. TVP5158 muxes multiple video streams and sends it ver 8bit interface.

Thx,

Brijesh

0 Shane Huang over 13 years ago in reply to Brijesh Jadav

Prodigy 135 points

Hi Brijesh,

I mean how de-muxing is done? Is there any code to do this job in DVRRDK. Or do you mean de-muxing is done by hardware?

0 HardikShah over 13 years ago in reply to Shane Huang

TI__Mastermind 20245 points

Hardware does that.

0 Brijesh Jadav over 13 years ago in reply to Shane Huang

TI__Guru**** 475745 points

Hi,

Essentially, hardware does demuxing and we could store the frame from each channel in a separate buffer.

Thx,

Brijesh

0 Shane Huang over 13 years ago in reply to Brijesh Jadav

Prodigy 135 points

Thanks Brijesh,

One more question, how the buffer is handled? Would you please point out the code handle this?

Shane

0 Brijesh Jadav over 13 years ago in reply to Shane Huang

TI__Guru**** 475745 points

Hi Shane,

McFw API takes care of buffer handling, i could not get what you want to understand.

Thx,

Brijesh

0 Shane Huang over 13 years ago in reply to Brijesh Jadav

Prodigy 135 points

Hi Brijesh,

I'm sorry I didn't make my question clear. I want to understand how the backend CPU handle datas output from TVP5158. Where do those codes locate?

Thank you!

Shane

0 Brijesh Jadav over 13 years ago in reply to Shane Huang

TI__Guru**** 475745 points

Hi Shane,

This has been taken care by the VPSS firmware, please contact you local TI FAE to get the details about this firmware.

Thx,

Brijesh

Processors

Processors forum

Where does de-mux code for TVP5158 locate in DVRRDK3.0?