Hi all,
If i gave #pppd call gprs command on terminal i am getting below Err.
modprobe: FATAL: Could not load /lib/modules/2.6.32-rc2-davinci1hht_v3.0/moduley
pl help.
rgds,
raghava
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi all,
If i gave #pppd call gprs command on terminal i am getting below Err.
modprobe: FATAL: Could not load /lib/modules/2.6.32-rc2-davinci1hht_v3.0/moduley
pl help.
rgds,
raghava
Hi,
do you have ppp support enabled in kernel ?
Hi
I am new bie to linux, I don't know exactly that ppp support is there or not in kenel, pl tel me how to check ppp support in kernel.
Rgds,
raghava
http://afewe.wordpress.com/android-arm-development/use-point-to-point-protocol-ppp-in-android/ - about pppd under android up/down scripts etc.
http://processors.wiki.ti.com/index.php/TI-Android-GingerBread-2.3.4-DevKit-2.1.1_PortingGuides#About_this_manual - USB 3G Modem chapter
to configure the kernel:
make ARCH=arm CROSS_COMPILE=arm-eabi- yourdefconfig
make ARCH=arm CROSS_COMPILE=arm-eabi- menuconfig //-you will see